Abstract:Hybrid optical films of TiO2-triethoxysilane-capped polythiourethane (TCPTU) with high refractive indices have been prepared via an in situ sol-gel method. The high refractive index triethoxysilane-capped polythiourethane (TCPTU) was synthesized by polyaddition of the triethoxysilane-modified trimercaptothioethylamine (TMTEA) and 2,2'-dimercaptoethylsulfide (MES) with 2,4-tolylene diisocyanate (TDI). The titania content in the hybrid films can be adjusted from 0 to 80 wt.-% by the feed ratio of titania precursor [Ti(OBu)(4)] to polymer (TCPTU). Both FTIR and DSC analyses indicate that there is chemical bonding between the titania domain and the polymer chain. TGA results suggest that the titania of high content was successfully incorporated into polymer matrices and this series of hybrid films have good thermal properties. AFM measurements indicate that in the hybrid films the titania domains are of nanosize scale and the domain size averagely decrease from 60-80 nm to 5-20 nm with increasing content of titania, and the variation of surface roughness for the hybrid films has the same trend. These may be relative to the content of TCPTU and the interaction between titania and polymer (TCPTU). The refractive indices of the hybrid films at 632.8 nm increased from 1 632 to 1 879 as the titania content varied from 0 to 80 wt.%.

Synthesisi and Characterization of New PMMA-TiO2 Organic-Lnorganic Hybrid Glasses

Poly(Methyl Methacrylate)-Titania Hybrid Materials by Sol-Gel Processing

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Synthesis and Characterization of PMMA-ZrO<sub>2</sub>(SiO<sub>2</sub>,TiO<sub>2</sub>,Al<sub>2</sub>O<sub>3</sub>) Organic-Inorganic Hybrid Materials

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Study on acrylic resin/titania organic–inorganic hybrid materials prepared by the sol–gel process

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

PREPARATION OF ACRYLIC RESIN/TiO2 ORGANIC-INORGANIC HYBRID BY SOL-GEL PROCESS AND CHARACTERIZATION OF ITS STRUCTURE

Poly(methyl Methacrylate)/silica/titania Ternary Nanocomposites with Greatly Improved Thermal and Ultraviolet-Shielding Properties

Poly(tetraethylene glycol malonate)–titanium oxide hybrid materials by sol–gel methods

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

Effect of Preparation of Titania Sol on the Structure and Properties of Acrylic Resin/Titania Hybrid Materials

Research On Preparation, Structure And Properties Of Tio2/Polythiourethane Hybrid Optical Films With High Refractive Index

Enhanced Thermal Properties and Flame Retardancy of a Novel Transparent Poly(methyl Methacrylate)-Based Hybrid Prepared by the Sol–Gel Method

Microstructure and Properties of Polyester-Based Polyurethane/titania Hybrid Films Prepared by Sol–gel Process

Interfacial structure of poly(methyl methacrylate)/TiO2 nanocomposites prepared through photocatalytic polymerization

Segmental Dynamics and Rheology of Miscible Poly(vinylidene Fluoride)/poly(methyl Methacrylate) (70/30 by Weight) Blend Filled with Titania or Poly(methyl Methacrylate)-Grafted Titania

PMMA–silica hybrid thin films with enhanced thermal properties prepared via a non-hydrolytic sol–gel process

High Refractive Index Films Prepared from Titanium Chloride and Methyl Methacrylate Via a Non-Aqueous Sol–Gel Route