Abstract:The focus of this work is to investigate the morphology, physical properties, and ion transport of tetraethyl orthosilicate (TEOS)-titanium isopropoxide (TIP)-polymer hybrid membranes depending on different composition. TEOS and TIP are two precursors used in sol-gel process to prepare Si-Ti mixed materials as the inorganic component. Penta block copolymer (PBC) is used as the organic component, which is poly(t-butyl styrene-b-ethylene-co-propylene-b-styrene-co-styrenesulfonate-b-ethylene-co-propylene-b-t-butyl styrene). Unlike the previous work done by soaking membrane in inorganic sol or mixing polymer with inorganic particles, TEOS-TIP-PBC hybrid membranes were prepared from homogenous inorganic-organic solutions by controlling different TEOS: TIP molar ratio and different concentration of inorganic components in hybrid membranes. Contact angle data by Kruss DSA 100 surface analyser, water uptake, proton conductivity by Autolab potentiostat, mechanical properties by dynamic mechanical analysis (DMA), and thermal stability by thermal gravity analysis (TGA) were investigated and highly affected by the composition. The most interesting results we found is that the proton conductivity of hybrid membranes with both acid and salt form was significantly increased compared with the pure PBC membranes, which opens the potential that these novel hybrid materials can be used in fuel cells, lithium-ion battery, or vanadium redox flow battery. In the future work, other polymers with sulfonate group, such as Nafion, will be included to prepare hybrid membranes. Moreover, other characterizations and applications, such as transmission electron microscopy (TEM), small angle x-ray scattering (SAXS), methanol permeability, and single cell performance of these hybrid membranes will be further investigated.

Poly(tetraethylene glycol malonate)–titanium oxide hybrid materials by sol–gel methods

ORMOCER Coatings Based on Titanium and Poly(tetraethylene glycol malonate)

Poly(Methyl Methacrylate)-Titania Hybrid Materials by Sol-Gel Processing

Synthesisi and Characterization of New PMMA-TiO2 Organic-Lnorganic Hybrid Glasses

Study on Poly(butyl Methacrylate)/silica-Titania Hybrid Materials

Preparation and Properties of Ti(Oc4h9)(4)-Gptms-Mma Derived Titania-Silica Sol-Gel Optical Coatings

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Structure and Optical Properties of Titania-PDMS Hybrid Nanocomposites Prepared by In Situ Non-Aqueous Synthesis

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Preparation of TEOS-GPTMS-PDMS Hybrid Material and Its Application in the Protection of Concrete

Preparation of Monolithic Aluminium Titanate with Well-Defined Macropores Via a Sol–gel Process Accompanied by Phase Separation

PREPARATION OF ACRYLIC RESIN/TiO2 ORGANIC-INORGANIC HYBRID BY SOL-GEL PROCESS AND CHARACTERIZATION OF ITS STRUCTURE

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Preparation Of Poly(Methyl Methacrylate-Co-Maleic Anhydride)/Sio2-Tio2 Hybrid Materials And Their Thermo- And Photodegradation Behaviors

Study on acrylic resin/titania organic–inorganic hybrid materials prepared by the sol–gel process

Designing Hybrid Inorganic-Organic Materials By Utilizing Sol-Gel Chemistry for Batteries and Energy Storage

Influence of Titanium Content and Temperature on Optical and Mechanical Properties of Sol Gel Derived TiO2/ -Glycidoxypropyltrimethoxysilane and Methyltrimethoxysilane Hybrid Organic Inorganic Films

Fundamental Studies of a New Hybrid (inorganic–organic) Positively Charged Membrane. II. Membrane Preparation Via Alcoholysis Reaction and Amination Processes of Silicone and Titanate Coupling Agents

Segmental Dynamics and Rheology of Miscible Poly(vinylidene Fluoride)/poly(methyl Methacrylate) (70/30 by Weight) Blend Filled with Titania or Poly(methyl Methacrylate)-Grafted Titania

Preparation and characterization of monolithic methylsilicone xerogels doped with liquid-phase synthesized TiO 2