Abstract:State-of-the-art Li–S batteries (LSBs) still suffer from a series of technical issues, including rapid capacity fading, due to polysulfide dissolution and shuttling, low active material loading in the cathode, and sluggish reaction kinetics. These challenges can be combatted through the application of efficient sulfur hosts that provide ample void structures, maintain electronic and ionic pathways, and confine soluble polysulfides within the cathode. This work uses sustainable glucose and sodium chloride as the precursors in a "sweet and salty" synthesis method to produce hierarchical porous carbon as the sulfur host for LSB cathodes. The as-prepared hierarchical porous carbon host (HPCH) is shown to have an exceptionally large specific surface area of 1540 m2 g–1 with a favorable pore size distribution due to the unique solvent/porogen system employed during synthesis. The porous matrix can adsorb the polysulfides at the cathode with the hydroxyl and carbonyl groups distributed on the HPCH surface. Systematic electrochemical investigation reveals that the HPCH also possesses both high ionic and electronic conductivity, which allows a reversible capacity of nearly 500 mA h·g–1 to be obtained after 500 cycles at 0.5 C and enhanced performance at high C rates. This work suggests that the as-prepared HPCH could be an excellent material to host other soluble electrode materials in electrochemical storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00367.Dispersion of carbon materials in aqueous and ethanoic KOH solutions; N2 adsorption/desorption isotherm, pore size distribution, XRD pattern, and Raman spectra from the CB sample; high-magnification SEM images of S/CB and S/HPCH cathodes; equivalent circuit from EIS analysis; fitting results from EIS analysis; and SEM images and EDS mapping of the high-loading S/CB and S/HPCH cathodes (PDF)This article has not yet been cited by other publications.

Lychee seed-derived microporous carbon for high-performance sodium-sulfur batteries

Natural Okra Shells Derived Nitrogen‐Doped Porous Carbon to Regulate Polysulfides for High‐Performance Lithium–Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Hierarchically porous carbon derived from delignified biomass for high sulfur-loading room-temperature sodium-sulfur batteries

Bio-mass derived hierarchically porous and high surface area carbon as an efficient sulfur host for lithium-sulfur batteries

Biomass‐Derived Micro‐Mesoporous Carbon with Oxygen Functional Groups for High‐Rate Na–S Batteries at Room Temperature

Confining Sulfur in N-Doped Porous Carbon Microspheres Derived from Microalgaes for Advanced Lithium-Sulfur Batteries.

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Promoting the Synergistic Effect of Sulfur Immobilization and Polysulfides Trapping by Nitrogen Functionalized Interconnected Hollow Carbon Nanocages for High-Performance Lithium–sulfur Batteries

A Sheet-like Carbon Matrix Hosted Sulfur As Cathode for High-performance Lithium-Sulfur Batteries

Optimized Sulfur-Loading in Nitrogen-Doped Porous Carbon for High-Capacity Cathode of Lithium–sulfur Batteries

Nitrogen and Oxygen Dual-Doped Hierarchical Porous Carbon Derived from Rapeseed Meal for High Performance Lithium–sulfur Batteries

Growing Intact Membrane by Tuning Carbon Down to Ultrasmall 0.37 nm Microporous Structure for Confining Dissolution of Polysulfides Toward High‐Performance Sodium–Sulfur Batteries

Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

Sustainable “Sweet and Salty” Synthesis of Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Reinforced conductive confinement of sulfur for robust and high performance Lithium-sulfur batteries.

Phosphor-Doped Carbon Network Electrocatalyst Enables Accelerated Redox Kinetics of Polysulfides for Sodium-Sulfur Batteries

Alleviating the self-discharge and enhancing the polysulphides conversion kinetics with LaCO3OH nanocrystals decorated hierarchical porous carbon

Tailored Reaction Route by Micropore Confinement for Li–S Batteries Operating under Lean Electrolyte Conditions

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Advanced lithium–sulfur batteries enabled by a SnS2-Hollow carbon nanofibers Flexible Electrocatalytic Membrane