Abstract:State-of-the-art Li–S batteries (LSBs) still suffer from a series of technical issues, including rapid capacity fading, due to polysulfide dissolution and shuttling, low active material loading in the cathode, and sluggish reaction kinetics. These challenges can be combatted through the application of efficient sulfur hosts that provide ample void structures, maintain electronic and ionic pathways, and confine soluble polysulfides within the cathode. This work uses sustainable glucose and sodium chloride as the precursors in a "sweet and salty" synthesis method to produce hierarchical porous carbon as the sulfur host for LSB cathodes. The as-prepared hierarchical porous carbon host (HPCH) is shown to have an exceptionally large specific surface area of 1540 m2 g–1 with a favorable pore size distribution due to the unique solvent/porogen system employed during synthesis. The porous matrix can adsorb the polysulfides at the cathode with the hydroxyl and carbonyl groups distributed on the HPCH surface. Systematic electrochemical investigation reveals that the HPCH also possesses both high ionic and electronic conductivity, which allows a reversible capacity of nearly 500 mA h·g–1 to be obtained after 500 cycles at 0.5 C and enhanced performance at high C rates. This work suggests that the as-prepared HPCH could be an excellent material to host other soluble electrode materials in electrochemical storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00367.Dispersion of carbon materials in aqueous and ethanoic KOH solutions; N2 adsorption/desorption isotherm, pore size distribution, XRD pattern, and Raman spectra from the CB sample; high-magnification SEM images of S/CB and S/HPCH cathodes; equivalent circuit from EIS analysis; fitting results from EIS analysis; and SEM images and EDS mapping of the high-loading S/CB and S/HPCH cathodes (PDF)This article has not yet been cited by other publications.

Hierarchically porous carbon derived from delignified biomass for high sulfur-loading room-temperature sodium-sulfur batteries

Natural Okra Shells Derived Nitrogen‐Doped Porous Carbon to Regulate Polysulfides for High‐Performance Lithium–Sulfur Batteries

P-doped porous carbon from camellia shell for high-performance room temperature sodium-sulfur batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Organic Thiocarboxylate Electrodes for a Room-Temperature Sodium-Ion Battery Delivering an Ultrahigh Capacity

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Chitin‐derived hierarchical meso‐ and microporous carbon enables high‐rate sulfur cathode of sodium‐sulfur batteries

Lychee seed-derived microporous carbon for high-performance sodium-sulfur batteries

Biomass‐Derived Micro‐Mesoporous Carbon with Oxygen Functional Groups for High‐Rate Na–S Batteries at Room Temperature

Achieving High-Performance Room-Temperature Sodium-Sulfur Batteries with S@Interconnected Mesoporous Carbon Hollow Nanospheres.

Nitrogen and Oxygen Dual-Doped Hierarchical Porous Carbon Derived from Rapeseed Meal for High Performance Lithium–sulfur Batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Metal–Organic Frameworks‐Derived Nitrogen‐Doped Porous Carbon Nanocubes with Embedded Co Nanoparticles as Efficient Sulfur Immobilizers for Room Temperature Sodium–Sulfur Batteries

Growing Intact Membrane by Tuning Carbon Down to Ultrasmall 0.37 nm Microporous Structure for Confining Dissolution of Polysulfides Toward High‐Performance Sodium–Sulfur Batteries

Covalent sulfur confined in mesoporous hollow carbon spheres for effective kinetic regulation of room-temperature sodium-sulfur batteries

MOF-Derived CoS2/N-Doped Carbon Composite to Induce Short-Chain Sulfur Molecule Generation for Enhanced Sodium-Sulfur Battery Performance

Green biomass-derived hierarchically porous non-activated carbon from carob waste for high-performance lithium-sulfur batteries

Cobalt, Nitrogen Co-Doped Microporous Carbon Matrix Derived from Metal Organic Frameworks Toward High Specific Capacity Room Temperature Sodium Sulfur Batteries

The design of chemisorption and catalysis synergistic defender for efficient room temperature sodium-sulfur batteries

Sustainable “Sweet and Salty” Synthesis of Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Highly efficient sulfur cathode built by biomass hierarchical porous carbon for aqueous Cu-S battery