Abstract:The ever-growing industrial society demand for limited natural resources and global energy consumption have given rise to the fast development of renewable energy storage technologies. Rechargeable batteries are considered to be indispensable for storing the supply of clean-but-intermittent energy sources, including solar and wind, in an efficiently and economically viable manner. Specifically, lithium-ion batteries (LIBs) with the reliable power capability and relatively mature storage mechanisms are commercialized in the market. However, due to shortage, high prices of lithium minerals, the physical energy density limits of innately available crystal sites, LIBs are unlikely to satisfy the need for grid-scale energy storage system in the long run. The urgent research for alternative sustainable energy storage device has led to the study of lithium-sulfur batteries (LSBs). With the new chemistries based on multi-electron conversion reaction between sulfur and lithium, LSBs are attracting great attention owing to large theoretical energy density of 2600 W h kg −1 , high natural abundance and low cost of the sulfur source. Yet, despite their intriguing virtues, the fulfillment of sulfur electrochemical performance is perplexed by several intractable challenges that cause undesirable capacity fading and cycling life. Triggered by continuous round-trip diffusion in ether-based electrolyte, the shuttling effect of highly active lithium polysulfides (LiPSs) will eventually cause severe sulfur loss, electrode decomposition, and Coulombic inefficiency in LSBs. Targeting this issue, we proposed the synthesis of a novel sulfur host in cathode based on a honeycomb-like, porous nitrogen-doped carbon network consisting of MoC with three-dimensional architecture as sulfur host to suppress the shuttling behavior of LiPSs. Benefiting from the interconnected carbon with strong physical adsorption and MoC planes as catalytic sites for acceleration of redox kinetics. We demonstrated experimentally here that this sulfur reservior could realize the improved cell performance with high electronic conductivity, excellent sulfur chemisorption, high rate capacity with 1316 at 0.1 C, 646mAh g -1 at 3C, and long cycling stability with a small capacity decay rate.

Bio-mass derived hierarchically porous and high surface area carbon as an efficient sulfur host for lithium-sulfur batteries

Carbonized Waste Milk Powders As Cathodes for Stable Lithium-Sulfur Batteries with Ultra-Large Capacity and High Initial Coulombic Efficiency

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Cinnamon-Derived Hierarchically Porous Carbon as an Effective Lithium Polysulfide Reservoir in Lithium–Sulfur Batteries

A Sheet-like Carbon Matrix Hosted Sulfur As Cathode for High-performance Lithium-Sulfur Batteries

Porous carbon derived from rice husks as sustainable bioresources: insights into the role of micro-/mesoporous hierarchy in hosting active species for lithium–sulphur batteries

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Hierarchical mesoporous heteroatom-doped carbon accelerating the adsorption and conversion of polysulfide for high performance Lithium–Sulfur batteries

Sustainable “Sweet and Salty” Synthesis of Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Optimized Sulfur-Loading in Nitrogen-Doped Porous Carbon for High-Capacity Cathode of Lithium–sulfur Batteries

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium–sulfur batteries

Green biomass-derived hierarchically porous non-activated carbon from carob waste for high-performance lithium-sulfur batteries

Lychee seed-derived microporous carbon for high-performance sodium-sulfur batteries

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Lithium‐metal free sulphur battery based on waste biomass anode and nano‐sized Li2S cathode

A three-dimensional conductive cross-linked all-carbon network hybrid as a sulfur host for high performance lithium-sulfur batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Biomass-garlic-peel-derived porous carbon framework as a sulfur host for lithium-sulfur batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

Three-Dimensional Carbon-Catalyst As Sulfur Host for Polysulfide Regulation in Lithium-Sulfur Batteries