Abstract:CaCO 3 -SiO 2 particles having a core-shell nanostructure were produced by a modified Stöber process using CTAB as a surfactant. Then, a porous structure composed of a silica shell was formed after the removal of the CaCO 3 cores as templates from the nanocomposite. To evaluate phase constitutions and microstructures of prepared nanoparticles, XRD, TEM, and FESEM–EDX techniques were utilized. The main aim of this work was to examine the usability of prepared CaCO 3 -SiO 2 and SiO 2 hollow shell nanoparticles instead of OPC in structural applications. In this way, the mixtures of cement mortar were made by partial replacement of 1% of cement mass with prepared nanoparticles. The amounts of calcium hydroxide (CH), bound water, and calcium carbonate for the prepared mortars have been calculated after 7 and 28 days of hydration through thermal analysis of TG/DTG. The results indicated that the CH content decreased by adding prepared nanoparticles as a cement replacement. As CaCO 3 -SiO 2 and hollow SiO 2 nanoparticles were used, the compressive strengths of mortars were enhanced by 34 and 59%, respectively, after 28 days, which were higher than the increasing influences on flexural strengths (29 and 55%). The increasing intensity of the XRD peaks related to the C-S-H phases and the decline of the orientation index of CH in a mortar containing silica shell suggest that hydration was further completed, leading to a strength improvement. The SEM micrographs indicated that the addition of prepared nanostructures improved the interface properties inside mortar and caused the microstructure to be denser.

Formation and characterization of ceramic coating from alumino silicate mineral powders in the matrix of cement composite on the concrete wall

Development of Carbon Capture Coating to Improve the Durability of Concrete Structures

Effect of Ceramic Powder on the Performance of Coating

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Surface properties and de-polluting performance of a photocatalytic coating incorporating novel core@shell nanospheres for cementitious substrate

Mechanical properties and anti-efflorescence of cement-based coating containing silicon-aluminum based powder and modified-polyacrylate emulsion

Investigation On The Mechanical Properties Of Csa Cement-Based Coating And Its Application

Coating of Silica Sand with Aluminosilicate Clay

Compatibility and Photocatalytic Capacity of the Novel Core@shell Nanospheres in Cementitious Composites

Preparation of coatings for moisture migration control of cementitious materials under low-vacuum environment

Preparation and characterization of core-shell structured CaCO3-SiO2 and hollow silica nanoparticles and evaluation of their effects on cement mortar properties

Preparation and Characterization of Calcium Silicate Slag Based Lightweight Wall Materials

Al(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing

Preparation and Characterization of Nanoscale Silicate Composite Architectural Heat-Insulating Coatings

Self-cleaning performance of autoclaved photocatalytic cement pastes: Insights into phase composition, microstructure and aluminum incorporation in C–S–H

Preparation and performance study of active chemicals in cementitious capillary crystalline waterproofing materials

Formation Mechanism for Al2O3-based Ceramic Coatings on Aluminum Alloy Substrates

Preparation and Properties of SiO_2-B_2O_3-MoSi_2-SiB_4 Coating for Ceramic Insulation Tile

Fabrication and Characterization of Ceramic Coatings with Alumina–silica Sol-Incorporated Α-Alumina Powder Coated on Woven Quartz Fiber Fabrics

Development of photocatalytic carbonation coating for concrete: Enhancement of air quality and sequestration of CO2