Abstract:The corrosion behavior of a bulk-synthesized Q-phase (Al4Cu2Mg8Si7) in NaCl solutions at different pH has been investigated using anodic and cathodic potentiodynamic polarization, time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). Potentiodynamic polarization reveals that the corrosion of Q-phase is pH dependent and Q-phase supports rapid anodic and cathodic reaction kinetics in an acidic and alkaline environment. It is seen that the electrochemical processes on the Q-phase changes from activation controlled in the acidic region to diffusion controlled in the neutral region, then to a mixed activation/ diffusion controlled process in the alkaline region. The trend of the corrosion rate is pH 1 > pH 13 > pH 12 > pH 2 > pH 10 > pH 4 > pH 6. On the other hand, the corrosion potential is seen to shift to more negative values with increase in the pH of the solution. ToF-SIMS and XPS analyses of the surface corrosion film revealed that selective dissolution of more active elements such as Mg, Al and Si occur during the corrosion of the Q-phase leading to Cu rich remnants discretely dispersed in the neutral region and more uniformly dispersed in the alkaline region. In the acidic region, the corrosion film formed on Q-phase is composed of mainly of oxides while in the neutral/alkaline region the corrosion film is composed mainly of oxides and hydroxides although the corrosion film formed in the alkaline region is thicker and richer in hydroxides compared to that formed in the neutral region.

Inhomogeneous phases in Cu-Zn-Al-Fe-Mn and the micro-galvanic coupling in 3.5 wt% NaCl solutions at different pH

Relationship of Corrosion Behavior Between Single-Phase Equiatomic CoCrNi, CoCrNiFe, CoCrNiFeMn Alloys and Their Constituents in NaCl Solution

Electrochemical, TOF-SIMS and XPS Studies on the Corrosion Behavior of Q-phase in NaCl Solutions As a Function of Ph

Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution

Understanding the Galvanic Corrosion of the Q-phase/Al Couple Using SVET and SIET

Initial localized corrosion induced by multiscale precipitates in the new generation high-strength Al-Zn-Mg-Cu alloy

Corrosion Behaviour of Al1.3CrFeNi Chemically Complex Alloy

Time-varying electrochemically heterogeneous entities during the micro-galvanic corrosion associated with nanoscale precipitates in an Al-Cu-Li alloy

Corrosion Behavior of High-performance Crystalline CuCrZr/Amorphous CuZrAl Composites in NaCl Solution

The effect of Mn addition on corrosion behaviour of equiatomic CoCrFeNi high entropy alloys in NaCl solution

Corrosion evaluation of Al-Cu-Mn-Zr cast alloys in 3.5% NaCl solution

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments

Corrosion of amorphous Fe73.5Si13.5B 9Nb3Cu1 alloys on the synergistic effect of chloride and hydroxyl ions

Corrosion and passive behaviors of the Co-Cr-Fe-Ni-Nb eutectic high-entropy alloys in different electrolyte solutions

Corrosion Behavior of Mg-Zn-Y-Zr Alloys in Nacl Solution

Pitting Corrosion Behavior in Novel Mn–N Alloyed Lean Duplex Stainless Steel Containing Cu

Atomic Scale Understanding of the Interaction Between Alloying Copper and Mns Inclusions in Stainless Steels in Nacl Electrolyte

Effects of Acidity and Alkalinity on Corrosion Behaviour of Al–Zn–Mg Based Anode Alloy

Corrosion Behavior of FeCrMnxAlCu High-Entropy Alloys in NaOH Solutions

Corrosion Behavior of 2198 Al–Cu–Li Alloy in Different Aging Stages in 3.5 Wt% NaCl Aqueous Solution

Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys