Abstract:When the buried pipeline passes through the permafrost zone, the phenomenon of frost swelling occurs in the permafrost zone, which causes a certain degree of bending and deformation of the pipeline. As a result, the pipeline's structural safety is compromised, and the pipeline finally fails during operation, posing a serious hazard to the natural gas pipeline's operation. Whereas the theoretical research on soil frost heave is relatively comprehensive, the applied research on engineering problems is not yet complete. Therefore, it is necessary to predict frost heaving through experiments and numerical simulation, and put forward reasonable control measures for existing or potential problems. For the problem of pipeline damage caused by frost swelling of soil in the natural gas high-pressure regulator station in a river and creek region, the Drucker-Prager elastic-ideal plastic model of soil was selected for finite element analysis, and a reasonable finite element model of pipe-soil was established in this paper. Through the temperature field analysis, it was found that the soil around the buried pipe is affected by the pipeline and is lower than its freezing temperature, which makes the soil freeze and swell. Furthermore, through the thermal-structural coupling analysis, it was found that the buried pipe is affected by the freezing and swelling of the soil and the structure is greatly likely to be damaged. In addition, by analyzing the temperature distribution and frost heave deformation of the soil around the pipeline, as well as the deformation and force of the pipeline at different pipe temperatures, this paper also determined the ideal temperature for preventing frost heave damage to natural gas at high-pressure regulator stations as -1 °C. Finally, based on the results of the abovementioned analysis, the heating method was determined to improve the frost damage phenomenon at the high-pressure regulator. The results of the anti-frost and swell study were used to conduct field trials at natural gas high-pressure regulator stations where frost and swell had occurred. By adding heating furnace to increase inlet temperature, frost heaving of gas transmission pipeline can be effectively prevented. The results of the research provide a reference for both existing and new natural gas pipelines, and also accumulate experience for winter maintenance design and construction of pipeline engineering in seasonally frozen soil areas.

Experiment on frost heave failure mechanism of PPR water pipe

Failure Prediction Model and Influence Parameter Analysis of Buried Cast Iron Water Mains

Experimental Study on Mechanical Interaction Between Buried Pipe and Soil During Freezing

Design of a Large Diameter Steel Reinforced Plastic Pipe

Experimental and Numerical Investigation on the Seismic Behavior of above Ground High Density Polyethylene Pipe in Nuclear Power Plant

Probabilistic model to predict longitudinal fracture failure of buried pvc pipes

Failure Prediction and Reliability Analysis of Buried Grey Cast Iron Water Mains Considering Corrosion

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Experimental Study of External Pipe Wall Erosion Due to Water Pipe Leakage

Numerical Studies on Filter of Piping in Broadly Graded Cohesionless Soils

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Model Test Investigation of Pipe-Soil Interaction under Frost Heave Conditions of Roadbed

Frost Heaving Damage Mechanism of a Buried Natural Gas Pipeline in a River and Creek Region

Failure Analysis on Premature Fracture of Polyethylene Pipe for Floor Heating System

Study on Mechanical Failure Behavior of Steel-Wire Wound Reinforced Thermoplastic Pipe under Combined Internal Pressure and Soil Landslide Conditions

Analysis and Evaluation on Residual Strength of Pipelines with Internal Corrosion Defects in Seasonal Frozen Soil Region

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Mechanical Modeling and Application of Frost Heaving Damage to Assembled Concrete Rectangular Canals in Seasonally Frozen Soil Region

Quantitative Assessment of Damage in Buried Polyethylene Pipe Subjected to Land Subsidence

Investigation on the mechanical properties of the reinforced thermoplastic pipe (rtp) under internal pressure

Experimental Investigation on Mechanical Properties of Plastic Pipes Reinforced by Cross Helically Steel Wires