Abstract:Powder Metallurgy route was employed to produce high entropy alloys Co–Cr–Ni-Mn–Fe–SiC x where x indicates the weight percentage of SiC. This investigation shows the different proportion of SiC content ( x = 2 wt.%, 4 wt.% and 6 wt.%) added in Co–Cr–Ni-Mn–Fe– powders. The trial samples were compacted using a press and subjected to sintering at two distinct temperatures ( T sint ) 1250° and 1350 °C respectively.T he composites were subjected to characterization technique such as optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and atomic force microscopy. These HEA alloys were analyzed for the distribution of SiC in HEA matrix using SEM and it was observed that the distribution of SiC was homogeneous, as shown in the matrix. The synthesized SiC reinforced composites are subjected to compression test, hardness test and corrosion test. The densification behavior was examined on the sintered specimens. The post sintering process study indicates that the density of HEA- 0 wt.% SiC, HEA-2 wt.% SiC, HEA- 4 wt.% SiC, and HEA-6 wt.% SiC composites, which was sintered at 1350 °C, are 7.38, 7.05, 6.73 and 6.41, respectively. Co–Cr–Ni-Mn–Fe HEA alloys sintered at 1350 °C have density of 0.66% greater than alloys sintered at 1250 °C.Co–Cr–Ni-Mn–Fe-4 wt.% SiC alloy sintered at 1350 °C and the properties like compression strength, corrosion resistance and hardness are found to be very high. Unreinforced Co–Cr–Ni-Mn–Fe alloy sintered at 1350 °C exhibits sinterability of 0.89.Among the composites sintered at 1250 °C and 1350 °C, Co–Cr–Ni-Mn–Fe-2 wt.% SiC exhibit highest sinterability of 0.81. The ball milled powder morphology was analyzed using SEM and elemental presence of Cr, Co, Mn, Ni, Fe, and SiCin the matrix was confirmed and verified by the energy dispersive spectroscopy (EDS) analysis. The HEA composite (Co–Cr–Ni-Mn–Fe- 4 wt.% SiC composite) sintered at 1350 °C exhibits the best corrosion resistance which was determined by the potentiodynamic investigation.

AlCoCrFeNi HEA reinforced Al–Si–Mg alloy composite through hot-press sintering

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Synthesis of high entropy alloy AlCoCrFeNiCuSn reinforced AlSi7Mg0.3 based composite developed by solid state technique

Investigations on Silicon Carbide Reinforced High Entropy Alloy (CoCrNiMnFe) matrix Composites Produced by Powder Metallurgy Process

AlCoCrFeNi High Entropy Alloy Reinforced Cu-based Composite with High Strength and Ductility after Hot Extrusion

Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high-entropy alloys: Microstructure, thermal stability, and microhardness

A New Type of High Entropy Alloy Composite Fe18Ni23Co25Cr21Mo8WNb3C2 Prepared by Mechanical Alloying and Hot Pressing Sintering

Exploring strengthening mechanism of FeCoNiAl high-entropy alloy by non-metallic silicon addition produced via powder metallurgy

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

Ceramic-reinforced HEA matrix composites exhibiting an excellent combination of mechanical properties

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Microstructure and properties of high entropy alloy reinforced titanium matrix composites

Influence of CrCuFeMnNi high entropy alloy particle on the microstructure and mechanical properties of aerospace-grade aluminum 7075 metal-metal composite

Synthesis and Characterization Study of Al10Cr25Co20Ni25Fe20 High-Entropy Alloy Powders through Mechanical Alloying

High-Entropy Alloy Particle Reinforced Al-Based Amorphous Alloy Composite with Ultrahigh Strength Prepared by Spark Plasma Sintering

Tailoring AlSi7Mg0.3 composite properties with CoCrMoNbTi high entropy alloy particles addition via FSP technique

Effect of FeCoNiMnCr High-Entropy Alloy Reinforcement on Mechanical, Wear, and Thermal Expansion Behavior of Copper Matrix Composites

Unveiling Enhanced Properties via Microstructural Evolution in Stir‐Cast Al6061 Composite Reinforced with AlCrFeNiTi High‐Entropy Alloy Particles.

Hot isostatic pressing of ball milled novel grade high entropy alloys at different sintering time and the investigation of their mechanical and corrosion resistance properties

The Influence of Multi-Phase Intermetallic Compounds on the Microstructure and Tribological Behaviors of 6061 Al Alloy by Adding AlCoCrFeNi High-Entropy Alloy

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement