Abstract:Photodeformable submicron Janus particles (JPs), containing an epoxy-based azo polymer (BP-AZ-CN) and poly(methyl methacrylate) (PMMA), were fabricated upon nonsolvent-induced phase separation. The formation of the JPs was induced by gradually adding deionized water into a tetrahydrofuran (THF) solution of both polymers. The results show that the two polymers start to precipitate from the solution at almost the same water content and immediately separate into two phases in each particle due to the strong incompatibility between the two components. After the nucleation, the sizes of the aggregates increase with increasing water content in the following growth stage. The amount of BP-AZ-CN molecules assembling into the aggregates is controlled by the water content in the medium, while the aggregation of PMMA molecules is a slow diffusion-controlled process due to the much higher molecular weight of this polymer. With a further increase in the water content in the dispersion medium, the swollen aggregates collapse to form JPs. Interestingly, when a dispersion with a water content of 50 vol % is diluted with a THF/H2O mixture with the same water content, the shapes of the JPs are significantly modified and vitrified after removal of THF through evaporation. By increasing the dilution multiples adopted to dilute the intermediate dispersions, JPs with more asymmetric shapes are obtained due to the enhanced asynchronous aggregation. Ternary phase diagrams calculated according to the Flory-Huggins theory provide a semi-quantitative description and rationalization of the phase separation behavior related to the thermodynamic factors. The differences in the transport behavior and aggregation dynamics of the two polymers are also proven to be critical for the formation of the asymmetric structures. Upon irradiation, the BP-AZ-CN compartments of JPs exhibit remarkable elongation along the electric vibrational direction of a linearly polarized laser beam at a wavelength of 488 nm.

Polymer blend particles with dual-phase morphology prepared using a novel one-pot method via a phase inversion emulsion procedure

Blending Properties of Polyethylene Blends Obtained by Hybrid Catalyst on Composite Support

Co-Continuous Polymeric Nanostructures Via Simple Melt Mixing of Ps/Pmma

Preparation of polystyrene/EVA/CaCO3 microspheres using a novel one-pot method via a phase inversion emulsion process

Janus-like Polymer Particles Prepared Via Internal Phase Separation from Emulsified Polymer/oil Droplets

Preparation of Bigger Core-Shell PS/PMMA Composite Particles by Suspension-Emulsion Combined Polymerization

A New Strategy to Prepare Polymer-based Shape Memory Elastomers.

Facile Synthesis of Core-Shell, Multiple Compartment Anisotropic Particles Via Control of Cross-Linking and Continuous Phase Separations in One-Pot Dispersion Polymerization

Facile approach for largely refining phase domains of PMMA/PS blends and improving their properties during extrusion

Facile Fabrication of Polymer-Inorganic Hybrid Particles with Various Morphologies by Combination of Hydrolytic Condensation Process with Radiation Seeded Emulsion Polymerization

Production of PS-PMMA Janus particles with special morphology based on phase separation for the preparation of Pickering emulsions

Concurrently Enhanced Mechanical Properties and Capacitive Performance in All-Organic Dielectric Polymer Blend Via Phase Separation

Synthesis of Latex Particles with a Complex Structure As an Emulsifier of Pickering High Internal Phase Emulsions

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Preparation of asymmetric particles by controlling the phase separation of seeded emulsion polymerization with ethanol/water mixture

Improved Miscibility of PA6 and Chitosan by the Electric-Field Assisted Phase Inversion.

Engineering Bicontinuous Polymeric Monoliths Through High Internal Phase Emulsion Templating

On the phase inversion of polypropylene/polystyrene blends

Photodeformable Azo Polymer Janus Particles Obtained Upon Nonsolvent-Induced Phase Separation and Asynchronous Aggregation

Phase Separation Of Silicon-Containing Polymer/Polystyrene Blends In Spin-Coated Films

Tailored Polymer Particles with Ordered Network Structures in Emulsion Droplets