Abstract:Phase separation of polymer blends has attracted much interest in designing high-performance materials with specific mechanical and dielectric properties. To this end, three types of poly(methacrylic ester)s, including poly(methyl methacrylate) (PMMA), poly(butyl methacrylate) (PBMA), and poly(isobutyl methacrylate) [P(iBMA)], have been incorporated in the poly(vinylidene fluoride-co-hexafluoropropylene) [P(VDF-HFP)] matrix, respectively. As exemplified in P(VDF-HFP)/P(iBMA) blended films, a conspicuous phase separation is experimentally observed and the blended film presents an enhanced Young's modulus and a one-fold increment in the elongation over the pristine P(VDF-HFP). The excellent plasticity is benefited from the interfacial regions between the two phases, which could effectively pin the cracks and retard the slippage under deformation. Simultaneously, an ultra-high Weibull breakdown strength (~ 774 MV/m) is obtained in the blends, benefiting from the improved Young's modulus and excellent plasticity. The blends are endowed with an excellent energy storage density (~& nbsp;21 J/cm(3) at 830 MV/m), along with an impressive cycling stability. In contrary, P(VDF-HFP)/PMMA and P(VDF-HFP)/PBMA blended films sacrifice the plasticity due to the scarcity of phase separation; therefore, even though Young's moduli have been improved, there is no remarkable improvement for breakdown strengths and energy storage performances. The experimental results are augmented by molecular dynamics simulations. This contribution provides a facile approach to develop high-performance polymer dielectric materials through a phase separation design and emphasize the importance of plasticity for breakdown strength.& nbsp;Published under an exclusive license by AIP Publishing.

Improved Miscibility of PA6 and Chitosan by the Electric-Field Assisted Phase Inversion.

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Study on ester-amide exchange reaction between PBS and PA6IcoT

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Morphology Evolution of Miscible Blends Between Crystalline Pa6 and Amorphous Pa6icot

Experimental Studies on the Phase Separation Behavior of Molten Benzenesulfonate-Modified PET/PA6 Blends

The Preparation of Monomer Casting Polyamide 6/Thermotropic Liquid Crystalline Polymer Composite Materials with Satisfactory Miscibility

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

On the phase inversion of polypropylene/polystyrene blends

Inversion of Phase Morphology in Polymer-Blend Thin Films on Glass Substrates

In Situ Control Of Co-Continuous Phase Morphology For Ps/Ps-Co-Tmi/Pa6 Blend

Facile approach for largely refining phase domains of PMMA/PS blends and improving their properties during extrusion

Composition dependent miscibility in the crystalline state of polyamide 6 /polyamide 4,10 blends: From single to double crystalline blends

Note: Interfacial layer and phase inversion behavior in the blend of polyethersulfone and polycarbonate

Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends

Concurrently Enhanced Mechanical Properties and Capacitive Performance in All-Organic Dielectric Polymer Blend Via Phase Separation

Compatibilization and morphology development of immiscible ternary polymer blends

Aza‐Michael Addition Chemistry for Tuning the Phase Separation of PDMS/PEG Blend Coatings and Their Anti‐Fouling Potentials