Abstract:Li metal could be the ideal anode for rechargeable battery technologies, due to its negative redox potential (ca. -3 V vs. SHE), high specific capacity (3860 mAh g −1 ), and low density (0.534 g cm −3 ) [1-3]. Recent advances show a new design concept where there are no initial active materials in the anode (no carbon, Si, or Li metal) and the corresponding Li quantity is directly deposited on the current collector during charging. This approach will result in important practical advantages such as enhanced volumetric and gravimetric specific energies, ease of manufacturing and reduced complexity/safety concerns of the recycling process (ideally Li is completely removed in the discharged state). However, the applicability of the Li-metal batteries is constrained by the nonuniform lithium deposition, accompanied by dendrite growth and the formation of dead lithium during long-term cycling, which lead to low Coulombic efficiency and even cell failure [2]. The initial structure and morphology of the Li deposit has a vital influence on the later progression of the Li layer [4]. This underpins the importance of a fundamental understanding of the electrodeposition process. However, the presence of a solid-electrolyte interphase (SEI) makes such investigations difficult, since after the transport of the Li ions through the SEI, a subsequent charge transfer and nucleation growth process at the substrate-SEI interface, instead of substrate-liquid electrolyte interface occurs. This contribution will discuss lithium electrodeposition in a sulfolane based, localized high concentrated electrolyte system. Possible phase formation mechanisms as well as kinetic and thermodynamic aspects during the initial stages of the process are studied by classical electrochemical methods (Fig. 1, left). Furthermore, the mass-charge balance during deposition and stripping was monitored (Fig. 1, right) via in-situ microgravimetry (electrochemical quartz crystal microbalance). In the contribution we will discuss these transients in terms of lithium layer growth and SEI formation. References: [1] X. Cheng et al., (2017) Chemical Reviews, 117 (15), p. 10403-10473. [2] J. Cui et al., (2017) Chinese Chemical Letters, 28 (12), p. 2171-2179. [3] Z. Hu et al., (2020) Frontiers in chemistry 8, p. 409. [4] A. Pei et al., (2017) Nano Letters, 17 (2), p. 1132–1139. Figure 1

Unraveling the Mechanism of Very Initial Dendritic Growth Under Lithium Ion Transport Control in Lithium Metal Anodes

Effect of Electrochemical Dissolution and Deposition Order on Lithium Dendrite Formation: a Top View Investigation

The factors that influence the electrochemical behavior of lithium metal anodes: electron transfer and Li-ion transport

The Factors That Influence the Electrochemical Behavior of Lithium Met-Al Anodes:Electron Transfer and Li-ion Transport

Revealing the lithium dendrite deposition/dissolution progression based on Monte Carlo method

Role of Li‐Ion Depletion on Electrode Surface: Underlying Mechanism for Electrodeposition Behavior of Lithium Metal Anode

Mechanistic Exploration of Dendrite Growth and Inhibition for Lithium Metal Batteries

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries

Nanoscale Observation of the Solid Electrolyte Interface and Lithium Dendrite Nucleation–growth Process During the Initial Lithium Electrodeposition

Electrochemical Atomic Force Microscopy Study on the Dynamic Evolution of Lithium Deposition

Toward Dendrite-Free Metallic Lithium Anodes: from Structural Design to Optimal Electrochemical Diffusion Kinetics

Understanding the Transport Mechanism of Lithium Ions in Solid-Electrolyte Interphase in Lithium Metal Batteries with Liquid Electrolytes

Phase-Field Modeling of Dendrite Growth in Lithium Electrodeposition Process in Lithium Metal Batteries

A Diffusion‐‐Reaction Competition Mechanism to Tailor Lithium Deposition for Lithium‐Metal Batteries

Kinetic understanding of lithium metal electrodeposition for lithium anodes

In Pursuit of a Dendrite-Free Electrolyte/Electrode Interface on Lithium Metal Anodes: A Minireview

Investigations on the Initial-Stages of Lithium Deposition/Dissolution Processes in Sulfolane Based Electrolytes

Engineering and characterization of interphases for lithium metal anodes

Insight into the Critical Role of Exchange Current Density on Electrodeposition Behavior of Lithium Metal

Controlling Nucleation In Lithium Metal Anodes