Abstract:In the current technological landscape, lithium metal batteries have significantly surpassed the energy density of conventional lithium-ion batteries. Therefore, The advent of anode-free lithium metal batteries (AFLMBs) offers higher energy densities.. They also provide advantages such as reduced process complexity and lower costs due to their design that eliminates the need for anode materials. Unlike the lithium-ion insertion and extraction reactions in traditional lithium-ion batteries. This makes them easier to lithium dendrite formation, which can puncture the separator or solid electrolytes, among other issues. In this work, we developed anin-operando electron microscopic technique with a unique vacuum square-cell design to ensure air-tight transfer of in-operandocells with vacuum protection into the SEM chamber. We significantly improved the imaging resolution with a windowless design, enabling the direct electron beam to focus on the electrode interfaces. Thus, real-time imaging of Li growth could be achieved via a stable current supply and controlled temperature. we systematically analyzed the Li growth and dendrite propagation behavior in AFLMBs using solid polymer electrolyte (SPE). In particular, we used polyethylene oxide (PEO)-based SPEs containing different lithium salts, namely 25wt% Lithium bis(trifluoromethanesulfonyl)imide ( LiTFSI ), Lithium difluoro (oxalateo)borate ( LiDFOB ), and Lithium bis(oxalate)borate ( LiBOB ), within a LiFePO 4 ||Cu anode-free cell configuration. Under a fixed current density, Li deposition and stripping were conducted, in which the PEO-LiTFSI SPE exhibited uniform deposition with a mossy lithium dendrite morphology. In the subsequent deposition process, some branching lithium dendrites were observed. Meanwhile, PEO-LiBOB showed uneven Li deposition with needle-like dendritic formation, potentially disrupting the SPE/electrode interface and leading to safety hazards. Lastly, PEO-LiDFOB initially showed mossy lithium deposition. In contrast, a few dendritic lithium structures appeared as the deposition process continued into the intermediate and later stages. The study successfully established a novel in-situ electron microscopy observation platform isolating water and oxygen. This platform recreated the actual battery operating environment, enhancing the credibility of experimental results. Additionally, we successfully elucidated the growth mechanisms of lithium dendrites in SPE with different lithium salts in the LFP||Cu configuration. This in-situ microscope technology aims to observe the relevant mechanisms behind dynamic deposition. Understanding how this deposition affects battery performance and safety and combining it with advanced operational and ex-situ characterization techniques can further promote the development of all-solid -state batteries in the future.

Electrochemical Atomic Force Microscopy Study on the Dynamic Evolution of Lithium Deposition

Unraveling the Mechanism of Non-Uniform Lithium Deposition in Liquid Electrolytes

Molecular Simulations of the Microstructure Evolution of Solid Electrolyte Interphase during Cyclic Charging/Discharging

Dynamic observation of dendrite growth on lithium metal anode during battery charging/discharging cycles

Lithium Dendrite Propagation in Anode-Free Lithium Metal Batteries: An in-Operando Scanning Electron Microscopic Study

Eliminating Dendrites through Dynamically Engineering the Forces Applied during Li Deposition for Stable Lithium Metal Anodes

Atomic Structure of Electrochemically Deposited Lithium Metal and Its Solid Electrolyte Interphases Revealed by Cryo–electron Microscopy

Dendrite-free Lithium Based on Lessons Learned from Lithium and Magnesium Electrodeposition Morphology Simulations

Columnar Lithium Metal Deposits: the Role of Non-Aqueous Electrolyte Additive

Liquid-Phase Electrochemical Scanning Electron Microscopy for in Situ Investigation of Lithium Dendrite Growth and Dissolution

Revealing the lithium dendrite deposition/dissolution progression based on Monte Carlo method

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

Nanoscale characterization of the solid electrolyte interphase and lithium growth by atomic force microscopy

Phase-Field Modeling of Dendrite Growth in Lithium Electrodeposition Process in Lithium Metal Batteries

Realizing Dendrite-Free Lithium Deposition with Three-Dimensional Soft-Rigid Nanofiber Interlayers

Probing The Dynamic Evolution Of Lithium Dendrites: A Review Of In Situ/Operando Characterization For Lithium Metallic Batteries

Morphology evolution of electrodeposited lithium on metal substrates

The dynamic evolution of aggregated lithium dendrites in lithium metal batteries

Liquid Phase Scanning Electron Microscopy: A New Approach to Investigate Lithium Dendrite Formation in Liquid Electrolytes

Electrode structure enabling dendrite inhibition for high cycle stability quasi-solid-state lithium metal batteries

(Invited) Atomically-Informed Phase-field Modeling of Li and Mg Electrodeposition Morphologies