Abstract:In the current technological landscape, lithium metal batteries have significantly surpassed the energy density of conventional lithium-ion batteries. Therefore, The advent of anode-free lithium metal batteries (AFLMBs) offers higher energy densities.. They also provide advantages such as reduced process complexity and lower costs due to their design that eliminates the need for anode materials. Unlike the lithium-ion insertion and extraction reactions in traditional lithium-ion batteries. This makes them easier to lithium dendrite formation, which can puncture the separator or solid electrolytes, among other issues. In this work, we developed anin-operando electron microscopic technique with a unique vacuum square-cell design to ensure air-tight transfer of in-operandocells with vacuum protection into the SEM chamber. We significantly improved the imaging resolution with a windowless design, enabling the direct electron beam to focus on the electrode interfaces. Thus, real-time imaging of Li growth could be achieved via a stable current supply and controlled temperature. we systematically analyzed the Li growth and dendrite propagation behavior in AFLMBs using solid polymer electrolyte (SPE). In particular, we used polyethylene oxide (PEO)-based SPEs containing different lithium salts, namely 25wt% Lithium bis(trifluoromethanesulfonyl)imide ( LiTFSI ), Lithium difluoro (oxalateo)borate ( LiDFOB ), and Lithium bis(oxalate)borate ( LiBOB ), within a LiFePO 4 ||Cu anode-free cell configuration. Under a fixed current density, Li deposition and stripping were conducted, in which the PEO-LiTFSI SPE exhibited uniform deposition with a mossy lithium dendrite morphology. In the subsequent deposition process, some branching lithium dendrites were observed. Meanwhile, PEO-LiBOB showed uneven Li deposition with needle-like dendritic formation, potentially disrupting the SPE/electrode interface and leading to safety hazards. Lastly, PEO-LiDFOB initially showed mossy lithium deposition. In contrast, a few dendritic lithium structures appeared as the deposition process continued into the intermediate and later stages. The study successfully established a novel in-situ electron microscopy observation platform isolating water and oxygen. This platform recreated the actual battery operating environment, enhancing the credibility of experimental results. Additionally, we successfully elucidated the growth mechanisms of lithium dendrites in SPE with different lithium salts in the LFP||Cu configuration. This in-situ microscope technology aims to observe the relevant mechanisms behind dynamic deposition. Understanding how this deposition affects battery performance and safety and combining it with advanced operational and ex-situ characterization techniques can further promote the development of all-solid -state batteries in the future.

Liquid Phase Scanning Electron Microscopy: A New Approach to Investigate Lithium Dendrite Formation in Liquid Electrolytes

Liquid-Phase Electrochemical Scanning Electron Microscopy for in Situ Investigation of Lithium Dendrite Growth and Dissolution

In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

In Situ Monitoring of Lithium Metal Anodes and Their Solid Electrolyte Interphases by Transmission Electron Microscopy

Nanoscale imaging of fundamental li battery chemistry: solid-electrolyte interphase formation and preferential growth of lithium metal nanoclusters

Effect of Electrochemical Dissolution and Deposition Order on Lithium Dendrite Formation: a Top View Investigation

Lithium Dendrite Propagation in Anode-Free Lithium Metal Batteries: An in-Operando Scanning Electron Microscopic Study

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Electrochemical Atomic Force Microscopy Study on the Dynamic Evolution of Lithium Deposition

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

Observing the structural diversity of electrochemically deposited lithium metal in three dimensions

Revealing the Distribution of Lithium Compounds in Lithium Dendrites by Four-Dimensional Electron Microscopy Analysis

In situ observation of solid electrolyte interphase evolution in a lithium metal battery

Dynamic Molecular Investigation of the Solid-Electrolyte Interphase of an Anode-Free Lithium Metal Battery Using In Situ Liquid SIMS and Cryo-TEM

Application of Alternating Current Scanning Electrochemical Microscopy in Lithium‐Ion Batteries: Local Visualization of the Electrode Surface

A Review of Solid Electrolyte Interphase (SEI) and Dendrite Formation in Lithium Batteries

Nanoscale Observation of the Solid Electrolyte Interface and Lithium Dendrite Nucleation–growth Process During the Initial Lithium Electrodeposition

The Application of in Situ Liquid Cell TEM in Advanced Battery Research

Revealing Lithium Nitrate-Mediated Solid-Electrolyte Interphase of Lithium Metal Anode via Cryogenic Transmission Electron Microscopy

Understanding Solid Electrolyte Interphase (SEI) Species at the Electrode-Electrolyte Interface in Liquid Lithium Metal Batteries Via in-Situ Fourier Transform Infrared (FTIR) Spectroscopy