Abstract:Dolomitic limestone is the main surrounding rock material in Yangzong tunnel engineering; the instantaneous mechanical properties and creep behaviors of limestone are significant for stability evaluation during the stages of tunnel excavation and long-term maintenance. Herein, four conventional triaxial compression tests were carried out to explore its instantaneous mechanical behavior and failure characteristics; subsequently, the creep behaviors of limestone subjected to multi-stage incremental axial loading at the confinements of 9 MPa and 15 MPa were studied by employing an advanced rock mechanics testing system (i.e., MTS815.04). The results reveal the following. (1) comparing the curves of axial strain-, radial strain-, and volumetric strain-stress under different confining pressures shows that these curves present a similar trend, whereas the stress drops during the post-peak stage decelerate with the increase in confining pressure, suggesting that the rock transits from brittleness to ductility. The confining pressure also has a certain role in controlling the cracking deformation during the pre-peak stage. Besides, the proportions of compaction- and dilatancy-dominated phases in the volumetric strain-stress curves differ obviously. Moreover, the failure mode of the dolomitic limestone is a shear-dominated fracture but is also affected by the confining pressure. (2) When the loading stress reaches a creep threshold stress, the primary and steady-state creep stages occur successively, and a higher deviatoric stress corresponds to a greater creep strain. When the deviatoric stress surpasses an accelerated creep threshold stress, a tertiary creep appears and then is followed by creep failure. Furthermore, the two threshold stresses at 15 MPa confinement are greater than that at 9 MPa confinement, suggesting that the confining pressure has an obvious impact on the threshold values and a higher confining pressure corresponds to a greater threshold value. Additionally, the specimen's creep failure mode is one of "abrupt" shear-dominated fracturing and is similar to that under a conventional triaxial compression test at high confining pressure. (3) A multi-element nonlinear creep damage model is developed by bonding a proposed visco-plastic model in series with the Hookean substance and Schiffman body, and can accurately describe the full-stage creep behaviors.

Study on mechanical characteristics of phyllite by conventional triaxial compression under multi-factors coupling action

Experimental Study on Brazilian Splitting of Phyllite under the Coupling Effects of Water, Pore and Bedding

Investigation into the degradation patterns of the physical and mechanical characteristics of phyllite within a hydrothermal environment

Investigation of Phyllite-based Brazilian tests and fracture failure patterns via AE and PFC3D

Dilatancy and Multi-Scale failure characteristics of a foliated rock under triaxial confinement unloading conditions

Experimental Investigation of the Mechanical Properties and Energy Evolution of Layered Phyllite Under Uniaxial Multilevel Cyclic Loading

Investigating the Creep Damage and Permeability Evolution Mechanism of Phyllite Considering Non-Darcy's Flow

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Energy evolution mechanism of the mechanical and creep properties of layered phyllite under uniaxial compression and creep tests

Transversely isotropic creep characteristics and damage mechanism of layered phyllite under uniaxial compression creep test and its application

Experimental Study on the Mechanical Characteristics of Thin-Bedded Rock Masses Due to Water-Absorption Softening and Structural Effects

Deformation Behaviour and Damage Evolution of Carbonaceous Phyllite under Cyclic Triaxial Loading

Characteristics and failure analysis of a railway tunnel collapse influenced by cavity in phyllite strata

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Numerical investigation on the mechanical and fracture behaviors of marble under cyclic loading and unloading true triaxial compression using discrete element method

Mechanical and failure characteristics of fissured marble specimens under true triaxial compression: Insights from 3-D numerical simulations

Triaxial Creep Mechanical Behaviors and Creep Damage Model of Dolomitic Limestone Material under Multi-Stage Incremental Loading

Characterization of the Brittleness of Hard Rock at Different Temperatures Using Uniaxial Compression Tests

Experimental study on the mechanical and permeability behaviors of limestone under hydro-mechanical-coupled conditions

Study on Microcrack Growth-Based Dynamic Compressive Mechanical Properties in Brittle Rocks

Experimental Study on the Anisotropy of Layered Rock Mass under Triaxial Conditions