Abstract:This paper reports the results of scratch tests on three rocks (Bonne Terre Dolomite, Alabama Marble and Dunnville Sandstone) conducted at depths of cut ranging from 0.2 mm to 2.6 mm. The experiments were performed on slabs of thickness slightly smaller than the cutter width, with a camera recording the entire cutting process. The test results reveal the existence of three cutting regimes: ductile, fragmentation, and brittle with increasing depth of cut. The regimes differ by the failure mode, the dependence of the specific energy ε on the depth of cut d, and the fragment shapes. In the ductile regime, ε∼d0 and the fragments are constitutive grains of the rock or powder as a result of intense shearing. In the fragmentation regime, ε∼d−1/2 and the fragments is a mix of ductile-type particles and flake-like chips also the product of shear failure. Finally, the brittle regime is characterized by ε∼d−1 and is essentially associated with chip-like fragments that come in two varieties depending on whether they are created by shear or by tension. The d−1-dependence of the specific energy can only be observed if the rock is sufficiently homogeneous at the scale of the experiment. The distinction between different modes of failure is based on evidence from video recording and fractography with a Scanning Electron Microscope. It is shown that the dominance of tensile over shear fracture is intimately related to the existence of a crushed zone, which acts as a wedge to initiate a tensile macrocrack in a compressive stress field. Finally, an analysis of the energy partitioning in the brittle regime indicates that the energy dissipated in creating new surfaces with a tensile crack is actually negligible compared to the energy expended in the formation of the wedge. This result indicates that the mode I toughness cannot be determined from the specific energy in the brittle regime, on the basis of a model of a crack parallel to the free surface, in contradiction with published claims to that effect. Finally, this experimental investigation clarifies some confusion in the literature, rooted on assuming the existence of only two modes of failure, ductile and brittle.

Investigation of Phyllite-based Brazilian tests and fracture failure patterns via AE and PFC3D

Experimental Study on Brazilian Splitting of Phyllite under the Coupling Effects of Water, Pore and Bedding

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Phase Field Characterization of Rock Fractures in Brazilian Splitting Test Specimens Containing Voids and Inclusions

Study on mechanical characteristics of phyllite by conventional triaxial compression under multi-factors coupling action

Investigation of Multiscale Failure Mechanism of Red Bed Soft Rock Using Grain-Based Finite-Discrete Element Method Combined with X-Ray Micro-computerized Tomography

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

Tensile mechanical properties and fracture evolution characteristics of sandstone containing parallel pre-cracks under dynamic loading

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

A study of crack initiation and source mechanism in the Brazilian test based on moment tensor

Fracture behavior of cylindrical sandstone specimens with two pre-existing flaws: experimental investigation and PFC3D simulation

Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

An experimental investigation of brittle failure mechanisms in scratch tests of rock

Dilatancy and Multi-Scale failure characteristics of a foliated rock under triaxial confinement unloading conditions

Experimental investigation of fracture behavior of rock-like materials containing 3D embedded flaws subjected to direct and unloading normal stress shear action

Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression

Experimental investigation on mechanical, acoustic, and fracture behaviors and the energy evolution of sandstone containing non-penetrating horizontal fissures

Study on Staged Damage Behaviors of Rock-like Materials with Different Brittleness Degrees Based on Multiple Parameters

Systematic detection and evaluation of cracking behavior of flawed brittle sandstones with AE and 3D-DIC techniques

Mechanical behavior and tension-shear failure mechanism of fractured rock mass under uniaxial condition