Abstract:A simple spray approach to fabricate superhydrophobic coatings on tile and glass substrates is presented. Commercial available polyphenylene sulfide (PPS) and hydrophobic silica (H-SiO(2)) powder were suspended in ethanol and the mixed suspensions were spray on substrates. After dried at different temperatures, surface coatings with different hydrophobicity were obtained. By observing the surface morphologies with scanning electron microscope (SEM) and atomic force microscope (AFM), and measuring water contact angles with a contact angle system, factors affecting the morphology, roughness and contact angle of the surface coatings, such as thermal treatment temperature and the weight ratio of H-SiO(2) to PPS, were investigated in detail. With the increase of the thermal treatment temperature, both the surface roughness and the contact angle increased when the temperature was lower than 280 degrees C. As the weight ratio of H-SiO(2) to PPS rose from 1: 10 to 1:1, more H-SiO(2) powders accumulated on the surface, leading to a significant increase of hydrophobicity. The surface coating obtained at 280 degrees C with the weight ratio of H-SiO(2) to PPS 1:1 showed a water contact angle higher than 150 degrees and a sliding angle lower than 4, exhibiting fascinating superhydrophobic properties. The surface coating could remain superhydrophobicity upon a further increase in thermal treatment temperature or the amount of H-SiO(2) powder. Moreover, the surface coatings showed high contact angles, larger than 150, for all the solutions with pH ranging from 1 to 14. The abrasion resistant property of the as-prepared superhydrophobic surface coating was tested using a homemade setup. Being scraped by freely-falling sands, the superhydrophobic coating could keep its high hydrophobicity, while a commercial hydrophobic coating transformed from hydrophobicity to hydrophilicity. This result implied our superhydrophobic surface coating was very stable. Moreover, chalk powders on the superhydrophobic surface coatings could easily be washed off with water, indicating good self-cleaning properties. The presented approach is convenient and can be potentially applied in fabrication of superhydrophobic surfaces in large scale.

Super hydrophobic glass bead and manufacturing methods thereof

Production of an EP/PDMS/SA/AlZnO Coated Superhydrophobic Surface through an Aerosol-Assisted Chemical Vapor Deposition Process

Highly Transparent and Highly Hydrophobic Coating for Outdoor Camera Window Glass: Fabrication, Transparency, and Hydrophobicity

Fabrication of superhydrophobic surfaces on a glass substrate via hot embossing

A Translucent and Superhydrophobic Surface Prepared With a Sol–Gel Method Based on Alumina Nanoparticles

The Preparation and Characterization of Uniform Nanoporous Structure on Glass

High retroreflective glass bead with high refractive index, and preparing method for thereof

A Facile Approach to Fabricate Superhydrophobic Coatings on Porous Surfaces Using Cross-Linkable Fluorinated Emulsions

Azeotropic Binary Solvent System Containing Nonfluorinated Polymer-Grafted Silica Nanoparticles for the Fabrication of a Superhydrophobic Surface

Preparation of Transparent Sandwich-like Superhydrophobic Coating on Glass with High Stability and Self-Cleaning Properties

Superhydrophobic polymer composite coating on glass via spin coating technique

PREPARATION AND PROPERTIES OF SUPERHYDROPHOBIC POLYPHENYLENE SULFIDE COMPOSITE COATINGS

Transparent Superhydrophobic and Self-Cleaning Coating

A Facile Approach to UV-curable Super-Hydrophilic Polyacrylate Coating Film Grafted on Glass Substrate

Low-cost preparation of durable, transparent, superhydrophobic coatings with excellent environmental stability and self-cleaning function

Preparation and characterization of antiglare waterborne polyurethane

Superhydrophilic Smart Coating for Self-Cleaning Application on Glass Substrate

Super-hydrophobic high-adhesion metal surface and manufacturing method thereof

Preparation and Characterization of Super-Hydrophobic Surface Through Particle Deposition by Vacuum Cold Spray

Fabrication of Superhydrophobic Nanostructures on Glass Surfaces Using Hydrogen Fluoride Gas

Mechanically Robust, Thermally Stable, Broadband Antireflective, and Superhydrophobic Thin Films on Glass Substrates