Abstract:The fabrication of a bionic super-hydrophobic metallic surface without any low-surface-energy modification is investigated, in which picosecond laser ablation, electropolishing and electrodeposition are used sequentially. The micro-cone structure is formed via laser ablation, and then the nano-pyramid structure is electrodeposited on the micro-cone structure, resulting in a hierarchical structure that is important for achieving super-hydrophobicity on an intrinsically hydrophilic material surface. In this study, the surface morphology and material removal mechanism are discussed with respect to the laser-ablated surface and the subsequent electropolished/electrodeposited surfaces. The condensation experiments results show that both types of surfaces are associated with relatively high contact angles (CAs) at normal temperatures, and the CAs are 147 degrees and 160 degrees, respectively. However, the CA on the laser-ablated surfaces at low temperatures decreases to as less as 107 degrees, which may be owing to the easy transition from Cassie state to a metastable state or even the Wenzel state, leading to a degraded hydrophobic surface. By contrast, the CA on the sequentially processed surfaces still maintains at 150 degrees, which should be attributed to the densely distributed nano-scale structures. The sequentially processed surfaces also show excellent long-term durability. Furthermore, this technique has been employed for fabricating super-hydrophobic surfaces with CM > 151 degrees and the sliding angles (SAs) < 8 degrees on the inclined surfaces with the inclination angle alpha < 30 degrees. Overall, the technique presented in this study supply a practical and reliable method for realizing the stable Cassie state and hence super-hydrophobicity on metallic surfaces.

Super-hydrophobic high-adhesion metal surface and manufacturing method thereof

Method for preparing metal surface superhydrophobic microstructure by femto-second laser

Superhydrophobic Surfaces with Micro-/Nano-structures Prepared by Femtosecond Laser

Nanostructuring of laser textured surface to achieve superhydrophobicity on engineering metal surface

Wettability regulation from superhydrophilic to superhydrophobic via nanosecond laser ablation

Superhydrophobic Surfaces Fabricated by Femtosecond Laser with Tunable Water Adhesion From Lotus Leaf to Rose Petal.

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

A Widely Applicable Method to Fabricate Underwater Superoleophobic Surfaces with Low Oil-Adhesion on Different Metals by A Femtosecond Laser

Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition

Preparation of super-hydrophobic surface on metal by picosecond laser pulses

Nanosecond Laser Fabrication Of Superhydrophobic Surface On 316l Stainless Steel And Corrosion Protection Application

Fabrication of Superamphiphobic Surface with Hierarchical Structures on Metal Substrate

Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties

Construction of superhydrophobic surfaces with different water adhesion on the low-temperature steels by picosecond laser processing

Robust and durable superhydrophobic coating prepared via a combined method of laser marking and electrodeposition

Fabrication of wear-resistant and superhydrophobic aluminum alloy surface by laser-chemical hybrid methods

Large Spot Diameter Nanosecond Laser Treatment of Aluminum Alloy Sheets for High-Speed Superhydrophobic Hierarchical Micro- and Nanostructured Surface Preparation

Scalable Wettability Modification of Aluminum Surface through Single-Shot Nanosecond Laser Processing

Wetting and tribological properties of superhydrophobic aluminum surfaces with different water adhesion

A novel combination of electrical discharge machining and electrodeposition for superamphiphobic metallic surface fabrication

Superhydrophobic Surfaces Fabricated by Microstructuring of Stainless Steel Using A Femtosecond Laser