Abstract:Abstract Fabrication of surfaces with hydrophobic and superhydrophobic property has drawn extensive interests as a solution to protect metal surfaces from corrosion attacks, with potential applications in cooling devices for electronics, microfluidic systems for controlled drug delivery, as well as anti-icing, and self-cleaning techniques. This study addresses the impact of surface wettability, i.e., hydrophobicity and superhydrophobicity, on corrosion resistance improvement of metal materials. Hydrophobic and superhydrophobic metal surfaces are desirable to minimize the adhesion between water droplets and the surface. This study aims to fabricate and investigate 17-4 PH stainless steel surfaces with lowered surface energies and modified wetting properties. Various micro- and sub-micro scale finished surfaces with different surface roughness, namely as-received, sandblasted, ground, and polished, were employed, followed by applying a low energy superhydrophobic coating to fabricate hydrophobic and superhydrophobic surfaces on 17-4 PH stainless steel base material. The specific impacts of the surface roughness on wettability and corrosion resistivity of the manufactured surfaces were examined. The ground and polished surfaces followed by applying a 30–50 μm thick superhydrophobic dip coating resulted in steady-state contact angles of up to 152° and 146°, respectively, while the non-engineered coated base metal exhibited the contact angle of 140°. The ground surface with the average surface roughness (Ra) of ∼ 0.03 μm has the optimal roughness. According to the Cassie-Baxter model, the coated ground surface can retain the entrapped air within its interstices more adequately than the other surfaces with either lower surface roughness, such as the polished surface with the roughness of 0.02 μm, or higher surface roughness, such as as-received and sandblasted surfaces with the Ra value of 5.52 μm and 11.98 μm, respectively. To study the corrosion performance and electrochemical stability of the fabricated surfaces, cyclic polarization testing (CPT) and electrochemical impedance spectroscopy (EIS) were performed in an aerated 3.5 wt.% NaCl solution that mimics seawater environment. The electrochemical measurements confirmed that the water-repelling property of the surface contributes to the anti-corrosion capability of the substrate. Data from the corrosion tests indicate that the lowest corrosion current density, highest corrosion potential, and highest pitting potential, were found for the coated ground surface followed by the coated polished surface. The EIS results also highlighted the significantly greater absolute value of impedance for the coated ground and coated polished surfaces even after 240 hrs of immersion in the electrolyte solution than the other fabricated surfaces at lower frequency ranges. The improvement in the 17-4 PH stainless steel corrosion performance was contributed to the size of the fabricated surface micro- and sub-micro scale features, capable of retaining the entrapped air within the roughened surface structure when fully immersed in a corrosive environment. This work demonstrates the effectiveness of a simple fabrication process to create hydrophobic and superhydrophobic stainless steel surfaces with improved corrosion resistivity.

Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties

Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance

Superhydrophobic Surfaces Fabricated by Microstructuring of Stainless Steel Using A Femtosecond Laser

Preparation of Stainless Steel Superhydrophobic Surface and Analysis of Hydrophobic Mechanism

Study on selective laser melting 316L stainless steel parts with superhydrophobic surface

Preparation of superamphiphobic stainless steel surface by laser and perfluorooctanoic acid treatment

Nanosecond Laser Fabrication of Hydrophobic Stainless Steel Surfaces: The Impact on Microstructure and Corrosion Resistance

Nanosecond laser etching for enhanced multi-scale layered micro-nano superhydrophilic 304 stainless steel surface

Fabrication and Corrosion Performance of a Superhydrophobic Stainless Steel Surface

One-Step Fabrication of Robust Superhydrophobic Steel Surfaces with Mechanical Durability, Thermal Stability, and Anti-icing Function.

Femtosecond laser-chemical hybrid processing for achieving substrate-independent superhydrophobic surfaces

Long term superhydrophobic and hybrid superhydrophobic/superhydrophilic surfaces produced by laser surface micro/nano surface structuring

Construction of superhydrophobic surfaces with different water adhesion on the low-temperature steels by picosecond laser processing

Femtosecond laser surface roughening and pulsed plasma polymerization duplex treatment on medical-grade stainless steel substrates for orthodontic purpose

A superhydrophobic surface with abrasion-corrosion resistance synergistic effect prepared by femtosecond laser on the FeMnSiCrNiNb shape memory alloy coating

Fabrication of wear-resistant and superhydrophobic aluminum alloy surface by laser-chemical hybrid methods

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

Laser Obtained Superhydrophobic State for Stainless Steel Corrosion Protection, a Review

Super anti-corrosion surface of Al-Li alloy via femtosecond laser ablation treatment in water

Controllable Construction and Corrosion Resistance Mechanism of Durable Superhydrophobic Micro-Nano Structure on Aluminum Alloy Surface

Mechanical, chemical and wetting properties of a superhydrophobic surface based on functionalized ZrO2 on stainless steel