High Density La-Fe-Si Based Magnetocaloric Composites with Excellent Properties Produced by Spark Plasma Sintering
X. C. Zhong,S. M. Wu,X. T. Dong,Y. X. Li,J. H. Huang,C. L. Liu,H. Zhang,Y. L. Huang,H. Y. Yu,W. Q. Qiu,Z. W. Liu,M. L. Zhong,Z. C. Zhong,R. Ramanujan
DOI: https://doi.org/10.1016/j.mseb.2022.115717
IF: 3.407
2022-01-01
Materials Science and Engineering B
Abstract:La(Fe,Si)(13) based magnetocaloric composites were prepared by spark plasma sintering (SPS), followed by annealing. The microstructure, mechanical and magnetocaloric properties were investigated. With increasing SPS temperature (TSPS) below 1373 K, the content of (La,Pr)(Fe,Co,Si)(13) majority phase increased, while the content of minority phase alpha-Fe decreased. The increase of TSPS from 973 K to 1373 K greatly improved the composite density, and the density sharply increased from -68 % to 98 %. After SPS at 1273 K/5 min followed by 1323 K/24 h annealing, high content of 89.35 wt% of the desired (La,Pr)(Fe,Co,Si)13 phase was obtained in LaFe11.6Si1.4/10wt%Pr2Co7 composites. A large increase of Curie temperature (TC) from 196 K to 297 K was observed. The maximum magnetic entropy change (delta SM)max reached 2.3 J/(kg?K) under 2 T magnetic field. -97 % of full density, excellent compressive strength of -1GPa and high thermal conductivity of 17.68 W/m.K were exhibited. Thus, a route to produce high density La-Fe-Si based magnetocaloric composites with excellent mechanical properties and thermal conductivity, good (delta SM)max and adjustable TC by short time spark plasma sintering followed by annealing was demonstrated.