Microstructure and magnetic properties of nickel-zinc ferrite ceramics fabricated by spark plasma sintering

Guixiang Liu,Bo Dai,Yong Ren,Kuibao Zhang,Dengjian Ye,Chunfeng Hu,Weitong Zhang,Shuai Fu

DOI: https://doi.org/10.1016/j.ceramint.2021.12.122

IF: 5.532

2022-04-01

Ceramics International

Abstract:Dense nickel-zinc (NiZn) ferrite ceramics were successfully fabricated within tens of seconds via spark plasma sintering. The phase composition and microstructure of the sintered samples were characterized by X-ray diffraction and scanning electron microscopy, respectively. The static magnetic properties at room temperature and Curie temperature of the samples were investigated by vibrating sample magnetometry. The results indicated that the main phase of the sintered samples was Ni0.75Zn0.25Fe2O4 with spinal structure, and the sintering temperature and heating rate observably affected the microstructure and density, then the magnetic properties of the sample. The Joule heat generated by NiZn ferrite during spark plasma sintering was very important for the rapid preparation of the sample with high density and small grain size. The low sintering temperature and heating rate would be helpful to obtain samples with small grain size, high density, and then good magnetic properties. The samples sintered at 900 °C with the heating rate of 5–10 °C/s were characterized of the relative density above 95%, 4πMs value beyond 4000 Gs and coercivity below 27.7 Oe.

materials science, ceramics