Abstract:The objective of this work was to investigate and evaluate the effect of the cooling environment on the microstructure, secondary phase precipitates and mechanical properties of an as-cast cobalt alloy. The microstructure of castings has a large bearing on the mechanical properties, grain size, porosity and the morphology of carbide precipitates are thought to influence hardness, tensile strength and ductility. It is postulated that a greater understanding of microstructure and secondary phase precipitate response to casting parameters could lead to the optimisation of casting parameters and serve to reduce the requirement of thermo-mechanical treatments currently applied to refine as-cast structures and achieve adequate mechanical properties. Thermal analysis was performed to determine the critical stages of cooling. Ten millimetre diameter cylindrical specimens which could be machined into tension test specimens were cast and cooled under different conditions to impose different cooling rates. Analytical techniques such as optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), tensile testing and micro-hardness testing were used to study the specimens. Parameters studied include grain size, secondary dendrite arm spacing, secondary phase precipitates, porosity, hardness, ultimate tensile strength, yield strength and elongation. The microstructure of as-cast Co-28Cr-6Mo was found to consist of a dendritic matrix with secondary phases precipitated at grain boundaries and interdendritic zones. These secondary phase precipitates consist of carbides, rich in chromium and molybdenum. The size and area fraction of carbides was found to decrease significantly with increasing cooling rate while the micro-porosity was only marginally affected. The as-cast grains are illustrated for the first time showing a significant difference in size between insulated and naturally cooled specimens. The secondary dendrite arm spacing was determined to be significantly affected by the various cooling environments and the mechanical properties of hardness, ultimate tensile strength and yield strength all increased with increasing cooling rate while the ductility decreased. Correlations between microstructural features and mechanical properties are proposed.

PM and Rheocasting in Ductile Iron Castings

Vermicular and Chunky Graphite Nucleation during Chill Casting: Study on the Dynamics of Ductile Iron Recycling

Microstructure evolution of heavy section ductile iron

Producing Structural High Integrity Castings with Minimum Carbon Footprint with the Comptech-Rheocasting Process

Effect of regular thicknesses on the microstructural and quantitative analysis for a hypo-eutectic ductile iron alloyed with Ni and V

Intensive Riser Cooling of Castings after Solidification

Experimental Studies on Rheocasting Processing of A356 Alloy

Influence of Investment Casting Manufacturing Conditions on As-Cast Microstructure and Erosive Wear Resistance of 26%Cr Cast Iron

The comparison of intensive riser cooling of castings after solidification in three classic metals

Effects of cooling rates on microporosity in DC casting Al-Li alloy

Internal Porosity Defects in Ductile Cast Irons

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

A study of cooling time, copper reduction and effects of alloying elements on the microstructure and mechanical properties of SG iron casting during machining

The Effects of MgFeSi and Inoculant Selection on Microstructure and Mechanical Properties of Varying Section Size Ductile Iron Castings

Improving Cooling Rate During Solidification by Eliminating the Metal–Mold Interfacial Gap

Research on key casting process of high-grade CNC machine tool bed nodular cast iron

Rheo-Diecasting of Magnesium Alloys

The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting

Microstructural Evolution of As-Cast 3.5%nicrmov Steel Containing Centimeter-Scale Grain Structure During Reheating and Plastic Deformation

Effect of Solidification Behavior on Microstructures and Mechanical Properties of Ni-Cr-Fe Superalloy Investment Casting

Relationships Between Macrostructure and Microstructure in Lamellar Graphite Iron Castings