Abstract:High-entropy alloys exhibit significant potential for application in the nuclear industry owing to their exceptional resistance to irradiation, excellent mechanical properties, and corrosion resistance. In this work, the Mo 0.5 V 0.5 NbTiZr x ( x = 0–2.0) high-entropy alloys containing alloying elements with low thermal neutron absorption cross section were designed and prepared. The crystal structure, microstructure, mechanical properties and corrosion resistance of the studied alloys were investigated. All the alloys possess a body-centered cubic crystal structure, which is consistent with the CALPHAD (acronym of CALculation of PHAse Diagram) modeling results. The addition of Zr does not alter the crystal structure of the Mo 0.5 V 0.5 NbTiZr x alloys; however, it leads to an increase in the lattice constant as Zr content increases. The addition of Zr initially enhances the yield strength, but subsequently leads to a decline as the Zr content increases further. Specifically, the corrosion resistance of the Mo 0.5 V 0.5 NbTiZr x alloys in superheated steam at 400 °C and 10.3 MPa decreases with the increase of Zr content. The effect of Zr content on the phase formation, mechanical properties and corrosion resistance of the Mo 0.5 V 0.5 NbTiZr x high-entropy alloys are discussed. This study has successfully developed a novel Mo 0.5 V 0.5 NbTiZr 0.25 high-entropy alloy, which demonstrates exceptional properties including high yield strength, excellent ductility, and superior anti-corrosion performance. The findings of this research have significant implications for the design of high-entropy alloys in nuclear applications.

Thermal stability and corrosion behavior of a novel Zr22.5Ti22.5Hf22.5Ni22.5Ta10 high-entropy amorphous alloy

Corrosion Behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr Refractory High-Entropy in Aqueous Chloride Solutions

Microstructure and Corrosion Property of Equiatomic AlNiZrCuY High Entropy Amorphous Composite Material

Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions

Microstructure, Mechanical Properties and Corrosion Resistance of the Mo0.5V0.5NbTiZrx High-Entropy Alloys with Low Thermal Neutron Sections

Synthesis and corrosion behavior of Mo15Nb20Ta10Ti35V20 refractory high entropy alloy

High-Temperature Rheological Behavior and Composition Design of Hf-Be-Ti-Zr-Cu-Ni High-Entropy Amorphous Alloy

Influence of Hafnium Addition on the Microstructure, Microhardness and Corrosion Resistance of Ti20Ta20Nb20(ZrMo)20-xHfx (where x = 0, 5, 10, 15 and 20 at.%) High Entropy Alloys

Microstructure, mechanical properties and corrosion resistance of CuZrY/Al, Ti, Hf series high-entropy alloys

Accelerated Discovery of (TiZrHf)x(NbTa)1‐x High‐Entropy Alloys with Superior Thermal Stability and a New Crystallization Mechanism

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Structure, thermal stability and transport properties of heat-resistant high-entropy ZrTiHfNb alloy

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature

Mechanical and Corrosion Behavior of Zr-Doped High-Entropy Alloy from CoCrFeMoNi System

Novel Metastable Engineering in Single-Phase High-Entropy Alloy

Study on mechanical alloying behavior and thermal stability of HfMoNbTaTi refractory high-entropy alloy

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Corrosion resistant nanostructured eutectic high entropy alloy

Effects of Nb and Zr Alloying on the Microstructure, Mechanical Properties, and Corrosion Resistance of CoCrFeNi High-Entropy Alloys

Effect of Metastability on Non-Phase-transformation High-Entropy Alloys

Influence of Zirconium on the Microstructure, Selected Mechanical Properties, and Corrosion Resistance of Ti20Ta20Nb20(HfMo)20−xZrx High-Entropy Alloys