Abstract:Hot embossing is an efficient technology for the fabrication of glass micro- and nanostructures. However, the long cycle time, high energy consumption, and high nitrogen emissions in traditional hot embossing approach hinders sustainable production of glass micro-optics. Therefore, this paper proposes a novel two-stage gravity-assisted hot embossing process that enables the fabrication of high-quality glass micro-pillar arrays in a rapid, green manner. In this approach, the two-stage gravity loading unit provides accurate force on glass preform through a simple control system, and the tailor-made heating module based on Si 3 N 4 ceramic heaters requires an energy consumption of just 700 kJ per molding cycle. As a result, the proposed approach is featured by low energy consumption and high manufacturing efficiency. In this study, the effects of the embossing temperature, force, and time on the replication accuracy of a K9 glass micro-pillar array were investigated through a series of hot embossing experiments. Afterward, the form accuracy, uniformity of microstructures, and warpage of glass replicas under the optimal process parameters were evaluated separately. Finally, repeated hot embossing experiments were conducted to demonstrate the reproducibility of the hot embossing process. The experimental results show that embossing temperature had the most significant effect on the replication accuracy of glass micro-pillars. By optimizing the process parameters, the embossed glass micro-pillars could achieve transfer ratios of 99.00% and 95.14% in height and diameter, respectively. Moreover, the surface roughness of glass micro-pillars was less than 5 nm, and the warpage amplitude of glass replicas in a 3.9 × 3.9 mm area was smaller than 1 μm. The small discrepancy in geometric features of glass replica in the repeated trails reflects the satisfactory reproducibility of this hot embossing process on the micro and nano scales. The results indicate the strong industrialization potential of the proposed two-stage gravity-assisted hot embossing machine and hot embossing process for fabricating high-quality glass microstructures more cleanly and sustainably.

Green Evaluation on Material Deformation Energy of Mechanical-Compressed Shear Rheology in Micro Hot-Embossing

The Energy Flow And Mechanical Modeling Of Soft Chemo-Mechanical Machines

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Defects in Micro Hot Embossing Process

Optimization of Control Parameters in Micro Hot Embossing

Research on Optimization of the Hot Embossing Process

Analysis of the Demolding Forces During Hot Embossing

Demolding Defects and the Design of Demolding Device in Micro Hot Embossing Process

Evaluating the energy properties of the short-flow process based on the industrial metabolism: A case study on the metal 3D printing of hybrid deposition and micro rolling (HDMR)

Studies of Polymer Deformation and Recovery in Hot Embossing

Effects of Dual Biomimetic Tool Surface Microstructure on Specific Cutting Energy in Green Turning

Evaluation of Warpage and Residual Stress of Precision Glass Micro-Optics Heated by Carbide-Bonded Graphene Coating in Hot Embossing Process

Study of the Demolding Process - Implications for Thermal Stress, Adhesion and Friction Control

In-situ observation on the real-time filling deformation of PMMA into microchannel during hot embossing

A novel hot embossing process for producing high-quality glass micro-pillar arrays

Application of Regression Analysis to Optimize Hot Compaction Processing in an Indirect Solid-State Recycling of Mg Alloy

The State of the Art in Plastic Micro?forming

Investigation of hot roller embossing for microfluidic devices

A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

Microforming: Experimental Investigation of the Extrusion Process for Micropins and Its Numerical Simulation Using Rkem

Processes for environmentally friendly and/or cost-effective manufacturing