Abstract:In micro fabrication, process energy consumption is derived from material deformation, but it is actually quantified by the power consumption of device, thus leading to the difficulty of green evaluation for micro machining behavior and method. In micro hot-embossing process, a mechanical-compressed shear rheology is proposed to describe material deformation in relation to the energy consumption. The objective is to compare the green technology with micro injection molding, micro additive manufacturing and so on. First, the rheological behavior and deformation energy was modeled on the base of the shear stress driven by mechanical compression. Accordingly, the forming efficiency of mechanical compression energy and shear rheology energy is analyzed to evaluate deformation energy ratio at different microscales and identify green fabrication zone. Finally, the deformation energy were investigated and related to microscales according to material properties, process variables, die core structure, etc. It is shown the microlens size and the corresponding energy consumption increase by the shear stress. The microprism decreases above the glass transition temperature as the mechanical compression energy increases due to elastic rebound. As a result, the most important factors affect heights and energy is core temperature and compression force, respectively. Mechanical compression energy can form more efficiently than shear rheology energy. By combining mechanical compression and shear rheology, the micro hot-embossing is efficiently and greenly performed with the deformation energy of 0.15 J/mm 3 and the deformation time of 0.006 s/mm 3 . For comparison, while comparable efficiency, the energy consumption of injection molding and additive manufacturing which should heat the whole polymer to a molten state, is 8 times and 60 times that of hot-embossing, respectively. While comparable energy consumption, the time requirement of plasma etching which needs to remove material in the atomic scale, is trillion times that of hot-embossing.

Application of Regression Analysis to Optimize Hot Compaction Processing in an Indirect Solid-State Recycling of Mg Alloy

An Optimization Approach for Hot Compaction Technology of Mg–10Gd–2Y–0.5Zr Alloy During Solid-State Recycling

Influence of Process Variables on Density of Aluminium Chip-Base Feedstock Prepared For Non-Melted Hot Extrusion Recycling

Consolidation behavior of Mg–10Gd–2Y–0.5Zr chips during solid-state recycling

Study on hot deformation behavior and dynamic recrystallization mechanism of recycled Al–Zn–Mg–Cu alloy

Energy-Economizing Optimization of Magnesium Alloy Hot Stamping Process

Optimizing strength of directly recycled aluminum chip-based parts through a hybrid RSM-GA-ANN approach in sustainable hot forging

Mechanical behavior of hot extruded aluminum 6082 chip

Energy modeling and efficiency analysis of aluminum die-casting processes

Solid-state recycling of AZ91D magnesium alloy chips

A Polycrystal Plasticity Based Thermo-Mechanical-dynamic Recrystallization Coupled Modeling Method and Its Application to Light Weight Alloys

Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning

Research on predicting the thermocompression deformation behavior of Mg-Li matrix composite using machine learning and traditional techniques

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Stiffness Analysis and Structure Optimization of Rolling Mill for Lithium-ion Battery Electrode Manufacturing

Microstructural and constitutive relationship in process modeling of hot working: The case of a 60Mg-30Pb-9.2Al-0.8B magnesium alloy

Enhancing constitutive description and workability characterization of Mg alloy during hot deformation using machine learning-based Arrhenius-type model

Effect of extrusion temperature on the surface roughness of solid state recycled aluminum alloy 6061 chips during turning operation

Green Evaluation on Material Deformation Energy of Mechanical-Compressed Shear Rheology in Micro Hot-Embossing

A review on solid-state recycling of aluminum machining chips and their morphology effect on recycled part quality

Hot Deformation Characteristics and Processing Parameter Optimization of Al–6.32Zn–2.10Mg Alloy Using Constitutive Equation and Processing Map