Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Physical and chemical properties of metallurgical coke and its evolution in the blast furnace ironmaking process

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

Pore Structure Evolution During the Coke Graphitization Process in a Blast Furnace

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Existence State and Structures of Extracted Coke and Accompanied Samples from Tuyere Zone of a Large-Scale Blast Furnace

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Microstructure Analysis and Mineral Phase Transformation of Coke in Blast Furnace

Study on the High-Temperature Interaction between Coke and Iron Ores with Different Layer Thicknesses

Microstructure and Melting Loss Behavior of Blast Furnace Incoming Coke and Radial Tuyere Coke

Optimizing the performance of iron coke by coal blending: Insights from the metallurgical properties and structural characteristics

Research on themetallurgical properties of coke used in Tangsteel ironmaking production

A study on the characteristics of coke in the hearth of a superlarge blast furnace

The Interfacial Behavior Between Coke and Liquid Iron: A Comparative Study on the Influence of Coke Pore, Carbon Structure and Ash

Evolution and process analysis of the hearth activity in hydrogen-rich blast furnace

A technical review on coke rate and quality in low-carbon blast furnace ironmaking

Effect of blast furnace coke graphitizing its high temperature metallurgical properties

Influence of Coke Deterioration Behavior in Blast Furnace on Microcrystalline Structure Characteristics

Effects of Iron Compounds on Pyrolysis Behavior of Coals and Metallurgical Properties of Resultant Cokes

Effect of gasification reaction on pore structure, microstructure, and macroscopic properties of blast furnace coke

A Comprehensive Review of Characterization Methods for Metallurgical Coke Structures

Microstructure Evolution Behavior of Blast-Furnace Coke under Different Gasification Reaction Conditions