Abstract:As the use of marine systems grows and the requirements for seawater lubrication grows, the performance of key marine alloys used in propulsion, bearings and mechanical seals is under scrutiny. For example, the increased use and size of bulk carriers and ocean liners requires performance of propellers to be better understood and cavitation resistance needs to be predicted and improved. The growth in marine autonomous and renewable energy systems as well as aquaculture also places emphasise on greater understanding of marine alloy tribocorrosion performance. Therefore, this paper will review marine wear and tribocorrosion and focus on candidate or existing materials for the components must at risk of wear (i.e. propulsion and seawater handling systems) and the mitigating strategies used to limit effects of wear in aggressive ocean environments. It will look at recent research into the performance of cast nickel aluminium bronze, a propulsion material of choice, under cavitation erosion and sliding wear conditions in saline solutions. The mass loss and in-situ electrochemical measurements during cavitation erosion corrosion over time will be presented along with detailed reference to microstructural and compositional changes on the surface and subsurface. The influence of surface films and their stability will be explored. For sliding wear tests the temporal aspects of film removal and repair as a function of sliding frequency will be presented along with complimentary wear rates, friction and corrosion currents. Some initial results on coatings and bulk composite alternatives to NAB will also be presented. Research into solid particle erosion-corrosion will also be presented for NAB. The challenges in quantification of the interactions between mechanical and electrochemical processes present under marine tribocorrosion are discussed in detail.

Metallic and Ceramic Materials Integrity—Surface Engineering for Wear, Corrosion and Erosion Prevention

Abrasive Wear Mechanisms of S235JR, S355J2, C45, AISI 304, and Hardox 500 Steels Tested Using Garnet, Corundum and Carborundum Abrasives

Technologies and materials for the renovation of erosion-worn parts of automobile equipment

Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications

Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear

Advanced Corrosion and High-Temperature Protection through Surface Modification and Coatings

Micromechanics of machining and wear in hard and brittle materials

Special Issue: “Surface Engineering and Coating Technologies for Corrosion and Tribocorrosion Resistance”

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Abrasive and adhesive wear behaviour of metallic bonds in a synthetic slurry test for wear prediction in reinforced concrete

The methodologies and strategies for the development of novel material systems and coatings for applications in extreme environments − a critical review

Special Issue: Friction, Corrosion and Protection of Material Surfaces

Slurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic Machinery

Tribology and Surface Engineering

Resistance to Abrasive Wear with Regards to Mechanical Properties Using Low-Alloy Cast Steels Examined with the Use of a Dry Sand/Rubber Wheel Tester

Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper and Brass

Principles of abrasive wear

Tribocorrosive Aspects of Tungsten Carbide, Silicon Nitride, and Martensitic Steel under Fretting-like Conditions

Wear Mechanisms of the Working Surface of Gears after Scuffing Tests

Marine wear and tribocorrosion

Experimental Study of Abrasive, Mechanical and Corrosion Effects in Ring-on-Ring Sliding Contact