Exploring Resistance Spot Welding for Grade 2 Titanium Alloy: Experimental Investigation and Artificial Neural Network Modeling

Marwan T. Mezher,Diego Carou,Alejandro Pereira

DOI: https://doi.org/10.3390/met14030308

IF: 2.695

2024-03-07

Metals

Abstract:The resistance spot welding (RSW) process is still widely used to weld panels and bodies, particularly in the automotive, railroad, and aerospace industries. The purpose of this research is to examine how RSW factors such as welding current, welding pressure, welding time, holding time, squeezing time, and pulse welding affect the shear force, micro-hardness, and failure mode of spot welded titanium sheets (grade 2). Resistance spot welded joints of titanium sheets with similar and dissimilar thicknesses of 1–1 mm, 0.5–0.5 mm, and 1–0.5 mm were evaluated. The experimental conditions were arranged using the design of experiments (DOE). Moreover, artificial neural network (ANN) models were used. Different training and transfer functions were tested using the feed-forward backpropagation approach to find the optimal ANN model. According to the experimental results, the maximum shear force was 5.106, 4.234, and 4.421 kN for the 1–1, 0.5–0.5, and 1–0.5 mm cases, respectively. The hardness measurements showed noticeable improvement for the welded joints compared to the base metal. The findings revealed that the 0.5–0.5 mm case gives the highest nugget and heat-affected zone (HAZ) hardness compared to other cases. Moreover, different failure modes like pull-out nugget, interfacial, and partial failure between the pull-out nugget and interfacial failure were noticed. The ANN outcomes based on the mean squared error (MSE) and coefficient of determination (R2) as validation metrics demonstrated that using the Levenberg–Marquardt (Trainlm) training function with the log sigmoid transfer function (Logsig) gives the best prediction, where R2 and MSE values were 0.98433 and 0.01821, respectively.

materials science, multidisciplinary,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

This paper mainly discusses the influencing factors of Resistance Spot Welding (RSW) in welding Grade 2 titanium alloy, including welding current, welding pressure, welding time, holding time, extrusion time, and pulse welding parameters, on the shear force, microhardness, and weld failure mode. The study analyzes these factors through experimental methods and Artificial Neural Network (ANN) modeling.

In the experiment, the author used titanium alloy plates of the same thickness (1-1mm, 0.5-0.5mm) and different thicknesses (1-0.5mm) for resistance spot welding, and evaluated the shear force, microhardness, and failure mode of the welds. The results showed that the welds with a thickness combination of 0.5-0.5mm had the highest weld nugget and heat affected zone hardness. The failure modes of the welds included pull-out type weld nugget, interface failure, and partial failure. Through the ANN model, based on mean square error (MSE) and coefficient of determination (R²), the study found that the model using the Levenberg-Marquardt training function and Log sigmoid transfer function had the best prediction effect, with an R² value of 0.98433 and an MSE value of 0.01821.

The paper points out that although resistance spot welding is widely used in industries such as automotive, railway, and aerospace, comprehensive research on the influence of RSW parameters on the performance of Grade 2 titanium alloy is still insufficient. Therefore, this study fills this gap through experiments and ANN models, providing a theoretical basis for optimizing titanium alloy RSW processes.