Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Optimization and Analysis of Refill Friction Stir Spot Welding (RFSSW) Parameters of Dissimilar Aluminum Alloy Joints by FE and ANN Methods

Neural Networks Applied for Predictive Parameters Analysis of the Refill Friction Stir Spot Welding Process of 6061-T6 Aluminum Alloy Plates

Comparative Analysis of Predictive Modeling Techniques for Mechanical Properties in Dissimilar Friction Stir Welding of AA6061 and AZ31B

Optimization of the Welding Parameters of High-Quality Aluminum/Copper FSSW Joints Using Taguchi Method Combined with Back Propagation Neural Network and Genetic Algorithm

ANN modeling and optimization of friction stir welding performance for AA6061 and AA5083 alloy joints

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys

Optimization of Friction Stir Welded Dissimilar Aluminum Alloys EN AW-5083-H111 and EN AW-6082-T651 using Hybrid Taguchi-Based Grey Relation Analysis

Analytical Approach for Forecasting the Load Capacity of the EN AW-7075-T6 Aluminum Alloy Joints Created Using RFSSW Technology

Modeling and Optimization of Friction Stir Welding Parameters for Joining Dissimilar Aluminum Alloys

Optimizing the process parameters in Friction stir Spot Welding Of Dissimilar Aluminum Alloys Using Genetic Algorithm

Development of FSW Process Parameters for Lap Joints Made of Thin 7075 Aluminum Alloy Sheets

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Entire-Process Simulation of Friction Stir Welding — Part 2: Implementation of Neural Networks

Optimization of Friction Stir Spot Welding Process Using Bonding Criterion and Artificial Neural Network

Research on the Surface-State Parameterization of a Refill Friction Stir Spot Welding Joint Made of Aluminum Alloy and Its Connection to the Fracture Mode

A comparative analysis of forecasting surface hardness in various aluminum friction stir welded joints: FEM-ANN hybrid versus ANN-PSO-integrated approaches

Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM

Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology

Assessment of friction stir spot welding of AA5052 joints via machine learning

Friction stir welding parameters optimization for tailored welded blank sheets of AA1100 with AA6061 dissimilar alloy using response surface methodology

Modeling and optimization of tool parameters in friction stir lap joining of aluminum using RSM and NSGA II