Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Finite Element-Based Parametric Studies of Nugget Diameter and Temperature Distribution in the Resistance Spot Welding of AISI 304 and AISI 316L Sheets

Optimization of resistance spot welding process parameters and microstructural examination for dissimilar welding of AISI 316L austenitic stainless steel and 2205 duplex stainless steel

Simulating Thermoelectric Effect and Its Impact on Asymmetric Weld Nugget Growth in Aluminum Resistance Spot Welding

A three-dimensional thermal finite element analysis of AISI 304 stainless steel and copper dissimilar weldment

Finite Element Simulation of Resistance Spot Welding Process of Aluminum Alloys

Experimental and finite element investigation of resistance spot welding of mild steel sheet covered aluminum alloy, AA 2017

Validated Multi-Physical Finite Element Modelling of the Spot Welding Process of the Advanced High Strength Steel DP1200HD

Experimental and Numerical Investigation of Mechanical Properties and Stress Intensity Factor of Dissimilar Spot Weld Joints

Impact of process parameters of resistance spot welding on mechanical properties and micro hardness of stainless steel 304 weldments

Comparative Study of Small Scale and 'large Scale' Resistance Spot Welding

Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties

Mathematical and Computational Modeling of Resistance Spot Welding Solidification Process

Optimization of Resistance Spot Welding with Inserted Strips via FEM and Response Surface Methodology

Effect of Forge-Time on Electrode Indentation, Thermal and Residual Stress Fields in Resistance Spot Weld Joints of AISI 1008 Steel Sheets

Collaborative Simulation of Nugget Growth and Process Signals for Resistance Spot Welding

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Development and validation of finite element model of dissimilar friction crush welding for automotive applications

Numerical Simulation Studies in Tungsten Inert Gas Welding of Inconel 718 Alloy Sheet

A computational and experimental study in resistance spot welding of thin–gauge and highly conductive dissimilar sheets for battery tab interconnects

Numerical Simulation of Pulsed Nd-YAG Laser Butt Welding of AISI 304L Stainless Steel Sheet and Experimental Validation

Parametric mathematical modeling and 3D response surface analysis for rod to plate friction welding of AISI 1020 steel/AISI 1018 steel