Abstract:An important problem determining the development of clean energy is the involvement of hydrogen in the fuel cycle. At present, the main method of hydrogen production is steam methane conversion. In the long term, large-scale hydrogen production, this method is not viable due to the consumption of non-renewable resources and the emission of greenhouse gases. Alternative methods of hydrogen production by water splitting methods using thermochemical or electrolysis processes require a high-temperature heat source. Nuclear reactors can serve as the most widely used high-temperature heat sources. The performed neutron-physical and thermophysical studies have shown that there is a fundamental possibility to provide the required parameters of a high-temperature (900-950 °C) with a 600 MW (thermal) fast neutron reactor with a sodium coolant for hydrogen production. It’s possible on the basis of one of the thermochemical cycles or high-temperature electrolysis with a high coefficient of thermal utilization of energy. It is shown that the temperature regime of core fuel elements is determined by a large number of parameters that have a regular and statistical nature. The developed methodology and numerical program allows to take into account, in the fuel assemblies shaped during the campaign, the effect on the temperature distribution of the fuel element cladding and temperature irregularities along the fuel element perimeter in the interchannel exchange fuel assembly, the random distribution of channel cross-sections and the heat generation of fuel elements using the Monte Carlo method, also other factors. For various reactor operating regimes, zones with stable temperature stratification with large gradients and temperature fluctuations have been identified. The results obtained make it possible to judge the amplitude and frequency characteristics of temperature pulsations in these potentially dangerous areas. The relative small size, the type of coolant, the choice of fissile material and structural materials make it possible to create a reactor with inherent properties that ensure increased nuclear and radiation safety.

Creating the foundations for safe nuclear power in Finland – Thermal hydraulics, safety analyses, safety justification methods research at the LUT University, 2000–2023

Nuclear engineering and design nuclear heat supply system for a small district heating reactor

Fusion Safety Experiments in Jaeri

Lead-Cooled Fast Reactor (LFR) Design: Safety, Neutronics, Thermal Hydraulics, Structural Mechanics, Fuel, Core, and Plant Design

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

The Primary Reactor Coolant System Concept of the Integral, Inherently-Safe Light Water Reactor

Code Development and Preliminary Validation for Lead-Cooled Fast Reactor Thermal-Hydraulic Transient Behavior

Versatile Testing Facility for Heavy Liquid-Metal-Cooled Fast Reactor at the University of Pittsburgh

Materials for Sustainable Nuclear Energy: A European Strategic Research and Innovation Agenda for All Reactor Generations

Liquid metal cooled fast reactor thermal hydraulic research development: A review

Review of Thermal-Hydraulic Issues and Studies of Lead-based fast reactors

A brief history of design studies on innovative nuclear reactors

THERMAL AND HYDRAULIC STUDIES OF A HIGH-TEMPERATURE NPP FOR HYDROGEN PRODUCTION AND OTHER TECHNOLOGICAL APPLICATIONS

An overall safety concept for nuclear power plants

OPTIMIZATION OF SAFETY PARAMETERS AND ACCIDENT MITIGATION MEASURES FOR INNOVATIVE FAST REACTOR CONCEPTS

Assessment on Safety Characteristics of Fusion Nuclear Reactor

Lessons learned from the experience of operating lead-bismuth nuclear power reactors

Advancing Methods for Fusion Neutronics: An Overview of Workflows and Nuclear Analysis Activities at UKAEA

Scaling methodologies and similarity analysis for thermal hydraulics test facility development for water-cooled small modular reactor