Abstract:The grand challenge of "net-zero carbon" emission calls for technological breakthroughs in energy production. The traveling wave reactor (TWR) is designed to provide economical and safe nuclear power and solve imminent problems, including limited uranium resources and radiotoxicity burdens from back-end fuel reprocessing/disposal. However, qualification of fuels and materials for TWR remains challenging and it sets an "end of the road" mark on the route of R&D of this technology. In this article, a novel approach is proposed to maneuver reactor operations and utilize high-temperature transients to mitigate the challenges raised by envisioned TWR service environment. Annular U-50Zr fuel and oxidation dispersion strengthened (ODS) steels are proposed to be used instead of the current U-10Zr and HT-9 ferritic/martensitic steels. In addition, irradiation-accelerated transport of Mn and Cr to the cladding surface to form a protective oxide layer as a self-repairing mechanism was discovered and is believed capable of mitigating long-term corrosion. This work represents an attempt to disruptively overcome current technological limits in the TWR fuels. After the Fukushima accident in 2011, the entire nuclear industry calls for a major technological breakthrough that addresses the following three fundamental issues: (1) Reducing spent nuclear fuel reprocessing demands, (2) reducing the probability of a severe accident, and (3) reducing the energy production cost per kilowatt-hour. An inherently safe and ultralong life fast neutron reactor fuel form can be such one stone that kills the three birds. In light of the recent development findings on U-50Zr fuels, we hereby propose a disruptive, conceptual metallic fuel design that can serve the following purposes at the same time: (1) Reaching ultrahigh burnup of above 40% FIMA, (2) possessing strong inherent safety features, and (3) extending current limits on fast neutron irradiation dose to be far beyond 200 dpa. We believe that this technology will be able to bring about revolutionary changes to the nuclear industry by significantly lowering the operational costs as well as improving the reactor system safety to a large extent.

A brief history of design studies on innovative nuclear reactors

The Design Features of Integrated Modular Water Reactor (IMR)

The main problems of transmutation of actinides and long-lived fission products from NPP spent fuel

A hopeless pursuit? National efforts to promote small modular nuclear reactors and revive nuclear power

Small Modular Nuclear Reactors: Development Prospects

The Primary Reactor Coolant System Concept of the Integral, Inherently-Safe Light Water Reactor

The ARIES-I Tokamak Reactor Study<sup>†</sup>

Safety scenario and integrated thermofluid test

A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits

What is the Future for Nuclear Fission Technology? A Technical Opinion from the Guest Editors of VSI NFT Series and the Editor of the Journal Nuclear Engineering and Design

Resilient Design in Nuclear Energy: Critical Lessons from a Cross-Disciplinary Review of the Fukushima Dai-ichi Nuclear Accident

Reactor Core Transient Analysis of an Innovative High-Level Nuclear Waste Transmuter with Metal Fuel

Generation IV Concepts

Nuclear Power An Optimistic Beginning, A Clouded Future

Zero power reactors in support of current and future nuclear power systems

Small Modular Reactors: Opportunities and Challenges as Emerging Nuclear Technologies for Power Production

Neutronic Design Study of a Small Modular IPWR Loaded with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Transient Characteristics of Typical Design Basis Accidents in Integrated Small Reactor NHR200-II Using RELAP5 Model

A Novel Idea of Power System Designing for Nuclear Plant with Small Modular Reactor

Physical characteristics of small modular Pb-Bi cooled reactor with nitride nuclear fuel

Conceptual design and safety characteristics of a new multi-mission high flux research reactor