Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Interference effects induced by electrodes and their influences on the distribution of light field in perovskite absorber and current matching of perovskite/silicon tandem solar cell

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Transparent Electrode for Monolithic Perovskite/silicon-Heterojunction Two-Terminal Tandem Solar Cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Reducing damage of sputtering and improving conductivity of transparent electrodes for efficient semi-transparent perovskite solar cells

Interface Reactive Sputtering of Transparent Electrode for High‐Performance Monolithic and Stacked Perovskite Tandem Solar Cells

Understanding the Interfacial Reactions and Band Alignment for Efficient and Stable Perovskite Solar Cells Built on Metal Substrates with Reduced Upscaling Losses.

The Progress of Interface Design in Perovskite‐Based Solar Cells

Understanding the Interfacial Reactions and Band Alignment for Efficient and Stable Perovskite Solar Cells Built on Metal Substrates with Reduced Up‐scaling Losses

Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells

Influence of Contact Electrode and Light Power on the Efficiency of Tandem Perovskite Solar Cell: Numerical Simulation

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Multi-layer transparent electrodes for high performance bifacial perovskite solar cells

Efficient Semitransparent Perovskite Solar Cells Using a Transparent Silver Electrode and Four-Terminal Perovskite/Silicon Tandem Device Exploration

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Transparent Recombination Electrode with Dual‐Functional Transport and Protective Layer for Efficient and Stable Monolithic Perovskite/Organic Tandem Solar Cells

Interfacial Study to Suppress Charge Carrier Recombination for High Efficiency Perovskite Solar Cells.

Sandwiched electrode buffer for efficient and stable perovskite solar cells with dual back surface fields

Transparent Ultrathin Metal Electrode with Microcavity Configuration for Highly Efficient TCO-Free Perovskite Solar Cells

The influence of the interface layer between the electron transport layer and absorber on the performance of perovskite solar cells

Advances in design engineering and merits of electron transporting layers in perovskite solar cells