Abstract:Wide-bandgap all-inorganic CsPbIBr 2 solar cells with MoO x /Ag/TeO 2 composite transparent electrode have been firstly used to construct a 4T perovskite/Si-heterojunction tandem cells. The calculation results showed that the long wavelength transmission (600 to 1100 nm) of MoO x /Ag film can be enhanced remarkably by adding a TeO 2 optical capping layer. This resulted in an obviously increase of the PCE (J SC ) from 10.70% (17.56 mA/cm 2 ) to 14.76% (24.67 mA/cm 2 ) for corresponding bottom Si cell in CsPbIBr 2 /Si devices, although the PCE of top CsPbIBr 2 cell decreased from 17.52% to 16.58%, the overall PCE of tandem device has increased from 28.22% to 31.34%. This J SC -dependent PCE improvement mainly came from the more balanced light absorption, which can be understood by the optical interference induced light field redistributions in CsPbIBr 2 /Si devices. Specially, comparing with the original Si cell, the J SC and PCE losses in bottom Si cell have been suppressed to about 33% and 32%, which are superior to most the reported pervoskite/Si tandem cells. Therefore, the tandem of Si cell and CsPbIBr 2 cell with optimized MoO x (20 nm)/Ag(8 nm)/TeO 2 (50 nm) transparent electrode could be the promising cost-effective photovoltaic in the future. This work is instructive to the fabrication of pervoskite/Si tandem solar cells.

Semitransparent perovskite solar cells with ultrathin silver electrodes for tandem solar cells

Efficient Semitransparent Perovskite Solar Cells Using a Transparent Silver Electrode and Four-Terminal Perovskite/Silicon Tandem Device Exploration

Working from Both Sides: Composite Metallic Semitransparent Top Electrode for High Performance Perovskite Solar Cells

Transparent Electrode for Monolithic Perovskite/silicon-Heterojunction Two-Terminal Tandem Solar Cells

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

Efficient Bifacial Semitransparent Perovskite Solar Cells Using Ag/V2O5 As Transparent Anodes

Wide-Bandgap All-Inorganic CsPbIBr<sub>2</sub> Top Cells With MoO<sub>x</sub>/Ag/TeO<sub>2</sub> Composite Transparent Anode Towards Efficient Four-Terminal Perovskite/Si Tandem Solar Cells

Semitransparent Perovskite Solar Cells with Dielectric/Metal/Dielectric Top Electrodes

Efficient Bifacial Semitransparent Perovskite Solar Cells with Silver Thin Film Electrode

Flexible semitransparent perovskite solar cells with gradient energy levels enable efficient tandems with Cu(In,Ga)Se2

Enhanced Efficiency of Semitransparent Perovskite Solar Cells via Double-Sided Sandwich Evaporation Technique for Four Terminal Perovskite-Silicon Tandem Application

Self‐Encapsulating Thermostable and Air‐Resilient Semitransparent Perovskite Solar Cells

Hierarchical Dual‐Scaffolds Enhance Charge Separation and Collection for High Efficiency Semitransparent Perovskite Solar Cells

Interface Reactive Sputtering of Transparent Electrode for High‐Performance Monolithic and Stacked Perovskite Tandem Solar Cells

High‐Performance Semitransparent and Bifacial Perovskite Solar Cells with MoO x /Ag/WO x as the Rear Transparent Electrode

Efficient TeO2/Ag transparent top electrode for 20%-efficiency bifacial perovskite solar cells with a bifaciality factor exceeding 80%

Semi-transparent Polymer Solar Cells with All-Copper Nanowire Electrodes

Semitransparent and Flexible Perovskite Solar Cell with High Visible Transmittance Based on Ultrathin Metallic Electrodes

Multilayer Transparent Top Electrode for Solution Processed Perovskite/Cu(In,Ga)(Se,S)2 Four Terminal Tandem Solar Cells.

Enhanced optoelectronic coupling for perovskite-silicon tandem solar cells

Over 28% Efficiency Perovskite/Cu(InGa)Se2 Tandem Solar Cells: Highly Efficient Sub-cells and Their Bandgap Matching