Abstract:LiNi0.8Mn0.1Co0.1O2||SiOx@graphite has received great attention in both academia and industry because it has the highest energy density among state-of-the-art commercial lithium-ion batteries. However, it suffers from severe capacity decay during high-temperature cycling or storage, which still needs to be addressed for its commercialization. In this work, fluoroethylene carbonate (FEC) is employed as an additive or a cosolvent to improve the high-temperature performance of 1 Ah LiNi0.8Mn0.1Co0.1O2||SiOx@graphite pouch cells. By adding 5% FEC as additive, the capacity retention increases from 54.5% to 67.0% after 100 cycles at 45 °C. The use of FEC as a cosolvent further increases the capacity retention to 83.3%. The improvement is ascribed to the multifunctional effects from FEC, preventing electrolyte decomposition, mitigating the resistance increment and Mn ions dissolution with the formation of the interface films, which consist of LiF and LiPOxFy species. Therefore, the employment of FEC is of great importance for the development of high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01679?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01679</a>.(Figure S1) Cycling performance of the NMC811||SiOx@Gr pouch cells with different electrolyte systems at 0.3 C and room temperature for 100 cycles; (Figure S2) EIS of the NMC811||SiOx@Gr pouch cells after formation and 100 cycles at 0.3 C and 45 °C; (Figure S3) SEM images of the NMC811 cathodes at raw state and after 100 cycles with the blank, 5% FEC system, and 30% FEC system; (Figure S4) TEM results of the SiOx@Gr anodes after 100 cycles for the three systems and at raw state; (Figure S5) GC-MS chromatograms of the three electrolytes after formation and 100 cycles at 45 °C; (Table S1) charge/discharge capacities and Coulombic efficiency in the first formation cycle of the NMC811||SiOx@Gr pouch cells using the three electrolyte systems; (Table S2) charge/discharge specific capacities of the NMC811 electrodes using different electrolyte systems in the voltage range of 3.0–4.2 V at 0.3 C and 45 °C; (Table S3) charge/discharge specific capacities of the SiOx@Gr anodes using different electrolyte in the voltage range of 0.005–4.2 V at 0.3 C and 45 °C; (Table S4) The main electrolyte components detected from GC-MS for the three electrolyte systems after formation and 100 cycles; (Table S5) LC-QTOF-MS results collected from the electrolytes after 100 cycles; (Table S6) LC-QTOF-MS results collected from the NMC811 cathodes after 100 cycles; (Table S7) LC-QTOF-MS results collected from the SiOx@Gr anodes after 100 cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01679/suppl_file/ae0c01679_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Isocyanate Additives Improve the Low-Temperature Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||SiOx@Graphite Lithium-Ion Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Delicately Designed Cyano‐Siloxane As Multifunctional Additive Enabling High Voltage LiNi0.9Co0.05Mn0.05O2/Graphite Full Cell with Long Cycle Life at 50 °C

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Low-Temperature Metal-Catalysed Synthesis of Metal Oxide Nanoparticles Encapsulated and Nitrogen-doped Carbon Nanotubes from Carbon Nitride as Anodic Materials of High-Performance Lithium-Ion Batteries

Phenyl TrifluoroMethane sulfonate as a novel electrolyte additive for enhancing performance of LiNi0·6Co0·2Mn0·2O2/Graphite cells working in wide temperature ranges

Enhancing electrochemical performance of nickel-rich NCM cathode material through Nb modification across a wide temperature range

Enabling the Low-Temperature Cycling of NMC||Graphite Pouch Cells with an Ester-Based Electrolyte

Modulating NCM622 electrode to efficiently boost the lithium storage and thermal safety of its full batteries

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||SiO x @Graphite Lithium-Ion Batteries

Solvation and Interfacial Engineering Enable -40 °C Operation of Graphite/NCM Batteries at Energy Density over 270 Wh kg-1

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Enhanced Low-Temperature Li-ion Storage in MXene Titanium Carbide by Surface Oxygen Termination

Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 °C

Empowering Low-Temperature Lithium-Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials

Cobalt-Doped Spinel Cathode for High-Power Lithium-Ion Batteries Toward Expanded Low-Temperature Applications

Ion Transport and Electrochemical Reaction in LiNi0.5Co0.2Mn0.3O2-Based High Energy/Power Lithium-Ion Batteries

Lithium difluorophosphate as a multi-functional electrolyte additive for 4.4 V LiNi0.5Co0.2Mn0.3O2/graphite lithium ion batteries

Enabling Ultra‐Low‐Temperature (‐70 °C) Lithium‐Ion Batteries: Advanced Electrolytes Utilizing Weak‐Solvation and Low‐Viscosity Nitrile Cosolvent

The Role of LiTDI Additive in LiNi1/3Mn1/3Co1/3O2/ Graphite Lithium-Ion Batteries at Elevated Temperatures

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries