Abstract:The optical path error, the position-independent geometric error, and the form and position tolerance of the substrate will lead to position deviations of the laser focus resulting in the inconsistency of the large area micro-structure and limiting the processing range of the femtosecond laser fabrication platform. To realize continuous defocus compensation along the processing trajectory, an autofocus scheme consisting of an optimized depth from focus (DFF) method based on grid division and the bilinear interpolation algorithm is proposed in this paper. The optimized DFF method includes the Laplace-DWT evaluation function combining the advantages of spatial domain and frequency domain sharpness evaluation function, an adaptive focusing window selection method, and an adaptive step length three-step hill-climbing search method. The optimized DFF method was used to obtain the best focus position of each grid point. Compared with the traditional DFF method, the optimized algorithm has higher focusing precision and avoids the disadvantage of time-consuming focusing. Then, to compensate for interpolating points of the processing trajectory, the bilinear interpolation algorithm was introduced to achieve online focusing during two-photon lithography processing. Finally, the feasibility and effectiveness of the auto-focusing scheme were validated by experiments. Through defocus compensation, the sharpness evaluation value of the focus image on the processing trajectory improved by 90%, which indicated the successful focus of the laser beam on the workpiece surface. Moreover, a high-precision and large-area encoded micro-polarizer array with consistent structure were fabricated successfully. This paper provides a simple way to identify and compensate the defocus errors online with high accuracy and efficiency. The proposed method can improve the machining accuracy and quality of the femtosecond laser direct writing.

Fine optimization of aberration compensation for stealth dicing

Aberration compensation method for dual-focus beams considering the effect of spatial light modulators flyback regions

Simulation study on physical features of a silicon substrate during stealth dicing with a constrained interpolation profile procedure

Stealth Dicing of 1-Mm-thick Glass with Aberration-Free Axial Multi-Focus Beams.

Super stealth dicing of transparent solids with nanometric precision

Investigation on the Processing Quality of Nanosecond Laser Stealth Dicing for 4H-SiC Wafer

Effects of Stealth Dicing Parameters on Singulation Defects and Die Strength

Optimizing the dicing saw parameters of 60 μm wafer dicing street

Dual Laser Beam Asynchronous Dicing of 4H-SiC Wafer

High-precision servo control design and optimization for dicing semiconductor wafer

Defocus compensation scheme for femtosecond laser direct writing of large-area non-periodic micro-structures

Good-Quality and High-Efficiency Dicing for Thick LiNbO3 Wafers Using Picosecond Laser Pulses

Ultrafast pulsed laser stealth dicing of 4H-SiC wafer: Structure evolution and defect generation

Wafer dicing and random defect driven reticle design

Compensation of shadow effect for one-dimensional diffractive structures via an approach of microfabrication

Interface failure behavior and mechanisms of 4H-SiC wafer with alloy backside layer caused by different dicing technologies

Effect of Blade Dicing Parameters on Die Strength

An experimental investigation of silicon wafer thinning by sequentially using constant-pressure diamond grinding and fixed-abrasive chemical mechanical polishing

Polarization Aberration Compensation Method by Adjusting Illumination Partial Coherent Factors in Immersion Lithography

Investigation of Dicing Saw Methods Impacting Back-End Assembly Process

Elimination of splash damage for smaller scribe widths in next-gen memory devices via stealth dicing