Abstract:Aggressive salts contained in formation waters accelerate the processes of corrosion and salt deposition in oilfield equipment, which leads to unforeseen accidents, contamination of soil and groundwater with harmful substances, as a result of which the ecological balance of the environment is disrupted. Corrosion and scaling that occur during oil production create difficulties during the operation of wells, and, consequently, increase the cost of produced oil.This article covers the results of studies concerning two compositions developed from technical phosphatide - an emulsion obtained by hydration of vegetable oils, as well as sodium hexametaphosphate, ammophos and polypropylene glycol bottoms. When vegetable oils are treated with water and steam (hydration process), the phospholipids contained in the oils combine with water and are released in the form of precipitates called phosphatide emulsions. Such emulsions consist of 45–75 % water, and the rest is phospholipids in the vegetable oil sediment.Technical phosphatides are a group of esters that contain a phosphoric acid residue associated with an amino alcohol. They are natural surfactants and are non-toxic.Preliminary studies have shown that each of the chemical compounds included in the developed reagents has certain inhibitory properties, but when formulated, these compounds provide a synergistic effect.Based on the results of laboratory studies, it was found that at an optimal concentration of reagents of 200 mg/l, the developed compositions provide protection of equipment from corrosion destruction by 94–95 %, and from scaling by 87–88 %. The developed mixed-type inhibitors at optimal concentrations equally effectively inhibit both cathodic and anodic processes on the electrode.The use of these inhibitors leads to the prevention of steel corrosion in the two-phase oil-electrolyte system, as well as to a significant reduction in the rate of scaling.The proposed new compositions can be used in oil wells and in-field transport systems, as well as in reservoir pressure maintenance systems to protect against corrosion and scale deposits.Field tests of the corrosion inhibitor were carried out in deep pumping wells at the Bibieybatneft oil and gas production department. Tests have shown that as a result of using the inhibitor, the protective effect at a concentration of 200 mg/l was 89–90 %, and the effect of salt deposition was 70 %.

Technology for producing anticorrosive materials from fat-containing waste

Green synthesis of polymeric surfactants from recycling of plastic waste for applications on steel protection in the petroleum industry

OBTAINING A CORROSION INHIBITOR BASED ON VEGETABLE OILS

Manufacturing of Corrosion Inhibitors and Flow Improvers from Recycling of Waste at Hail City, Saudi Arabia: Physicochemical and Electrochemical Studies on Steel in Petroleum Industries

Electrochemical activation as a fat rendering technology

From Waste to Protection: A Green Industrial Recycling Approach to Generate an Eco-Friendly Corrosion Inhibitor for 304 Stainless Steel in Saline Solutions

Conversion of Acidic Heavy Resid to Surfactant for Separating Water-Oil Emulsions and Increasing Oil Production

Protection against Atmospheric Corrosion by Means of Coatings Based on a Fluorine-Containing Surfactant

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution

STUDYING THE INFLUENCE OF NEW COMBINED INHIBITORS ON THE PROCESSES OF CORROSION AND SALT DEPOSITION IN OIL-FIELD EQUIPMENT

Novel Natural Surfactant-Based Fatty Acids and Their Corrosion-Inhibitive Characteristics for Carbon Steel-Induced Sweet Corrosion: Detailed Practical and Computational Explorations

Processing of Oil-Tank Sludge by Hydrothermal Dispersion using polycomplexants and Amino-Acid-Salts

Optimization of technology for processing liquid waste from meat processing plants

Obtaining effective oil sorbents based on chemical industry waste for water treatment

Experimental and theoretical simulations to examine the influence of nonionic surfactant on the corrosion control of mild steel in hydrochloric acid

Study of the physical and chemical characteristics of an immobilized lipase in the hydrolysis of fat waste

Production and purification of organic acids from partially oxidised waste activated sludge

The complexes of synthetic and petroleum acids N-derivatives as steel acidic corrosion inhibitors

Synthesis of Polyaluminum Chloride Coagulant from Waste Aluminum Foil and Utilization in Petroleum Wastewater Treatment

Liquefaction of Waste Rendering Fat Using Iron Containing Catalysts

The use of liquid fatty waste from restaurants as an alternative raw material for the food industry, biomedical and pharmaceutical applications, and the production of biofuel