Abstract:In this Research Article, the calculated concentration values for all five electrolytes (i.e., ND-1, ND-2, NDD-3, 2.83 m NaPF6 in DEGDME, and 3.2m-NaPF6 in DEGDME/DOL) are inaccurate. Owing to the miscalculation for molality, the corresponding descriptions of electrolyte concentration in the main text and Supporting Information are inconsistent with the electrolytes that were actually used. After careful recalculation, the relevant text should be modified as follows: In the Introduction section, “3.04 m NaPF6 in diethylene glycol dimethyl ether (DEGDME) with the addition of 1,3-dioxolane (DOL) diluent (10:1 by volume ratio)” should be revised to “3.36 m NaPF6 in diethylene glycol dimethyl ether (DEGDME) with the addition of 1,3-dioxolane (DOL) diluent (10:1 by volume ratio)” based on the following equation and calculation: Where the density and molecular weight (M) of DEGDME is 0.94 g/mL and 134.17. The density and M of DOL is 1.06 g/mL and 74.08. The molar (m) ratio of NaPF6/DEGDME/DOL is almost equivalent to 5:10:2 for actual NDD-3 electrolyte. Similarly, “0.94 m NaPF6 in DEGDME” (i.e., ND-1), “1.88 m NaPF6 in DEGDME” (i.e., ND-2), “2.83 m NaPF6 in DEGDME”, and “3.2m-NaPF6 in DEGDME/DOL” should be “1.06 m NaPF6 in DEGDME”, “2.13 m NaPF6 in DEGDME”, “3.19 m NaPF6 in DEGDME”, and “3.83m-NaPF6 in DEGDME/DOL”, respectively, in the main text and/or Supporting Information. These changes are due to a miscalculation, rather than the experimental processes, and do not affect the interpretation of the data, discussion, or conclusions. The main contents and conclusions of the original Research Article are not affected by this Corrigendum. The authors apologize for this oversight, and thank Mr. Xiangjun Pu and Prof. Yuliang Caofrom Wuhan University for making us aware of this issue.

Correction: Bridging the immiscibility of an all-fluoride fire extinguishant with highly-fluorinated electrolytes toward safe sodium metal batteries

Correction: An aqueous hybrid electrolyte for low-temperature zinc-based energy storage devices

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Correction: An oxygen-blocking oriented multifunctional solid–electrolyte interphase as a protective layer for a lithium metal anode in lithium–oxygen batteries

Erratum: Revealing the Mechanism Behind Sudden Capacity Loss in Lithium Metal Batteries ]

Author Correction: A weakly solvating electrolyte towards practical rechargeable aqueous zinc-ion batteries

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition (vol 15, Pg 7949, 2024)

LiFSI As a Functional Additive of the Fluorinated Electrolyte for Rechargeable Li-S Batteries

Correction: Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

Correction to Fluorinated Materials as Positive Electrodes for Li- and Na-Ion Batteries

Correction: Influence of microstructure evolution on the discharge properties of the Al–Mg–Sn–Ga–In anode for Al–air batteries

Correction: High-performance dual-ion Zn batteries enabled by a polyzwitterionic hydrogel electrolyte with regulated anion/cation transport and suppressed Zn dendrite growth

Stabilizing a sodium-metal battery with the synergy effects of a sodiophilic matrix and fluorine-rich interface

Correction: A rechargeable Li–CO2 battery based on the preservation of dimethyl sulfoxide

Correction: the Role of an Elastic Interphase in Suppressing Gas Evolution and Promoting Uniform Electroplating in Sodium Metal Anodes

Correction to "Switching Reaction Pathway of Medium-Concentration Ether Electrolytes to Achieve 4.5 V Lithium Metal Batteries"

Corrigendum: Ether‐Based Electrolyte Chemistry Towards High‐Voltage and Long‐Life Na‐Ion Full Batteries

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Correction: Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Implanting a Fire‐Extinguishing Alkyl in Sodium Metal Battery Electrolytes via a Functional Molecule