Abstract:Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of a telescope and residual wavefront errors, efficient coupling with single-mode devices can indeed be realised. A fibre injection was built within the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument. Light was coupled into a single-mode fibre operating in the near-IR (J − H bands) which was downstream of the extreme adaptive optics system and the pupil apodising optics. A coupling efficiency of 86% of the theoretical maximum limit was achieved at 1550 nm for a diffraction-limited beam in the laboratory, and was linearly correlated with Strehl ratio. The coupling efficiency was constant to within <30% in the range 1250–1600 nm. Preliminary on-sky data with a Strehl ratio of 60% in the H-band produced a coupling efficiency into a single-mode fibre of ~50%, consistent with expectations. The coupling was >40% for 84% of the time and >50% for 41% of the time. The laboratory results allow us to forecast that extreme adaptive optics levels of correction (Strehl ratio >90% in H-band) would allow coupling of >67% (of the order of coupling to multimode fibres currently) while standard levels of wavefront correction (Strehl ratio >20% in H-band) would allow coupling of >18%. For Strehl ratios <20%, few-port photonic lanterns become a superior choice but the signal-to-noise, and pixel availability must be considered. These results illustrate a clear path to efficient on-sky coupling into a single-mode fibre, which could be used to realise modal-noise-free radial velocity machines, very-long-baseline optical/near-IR interferometers and/or simply exploit photonic technologies in future instrument design.

Transport and magnetic properties of La_(1-x)Ca_xMnO_3-films (0.1<x<0.9)

Integrated optics for astronomical interferometry. I. Concept and astronomical applications

An infrared integrated optic astronomical beam combiner for stellar interferometry at 3-4 microns

A simple beam combination for stellar interferometry

Photonic beam-combiner for visible interferometry with SCExAO/FIRST: laboratory characterization and design optimization

Asymmetric Beam Combination for Optical Interferometry

An integrated optical coupler used in a fibre interferometry system for on-line surface measurements

Practical demonstration of a six-telescope integrated optics beam combiner for the astronomical J- and H-band manufactured with ultrafast laser inscription

A six-apertures discrete beam combiners for J-band interferometry

Photonic chip for visible interferometry: laboratory characterization and comparison with the theoretical model

Integrated astrophotonic phase control for high resolution optical interferometry

On-chip spectro-detection for fully integrated coherent beam combiners

Novel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Laboratory characterization of FIRSTv2 photonic chip for the study of substellar companions

Integrated photonic building blocks for next-generation astronomical instrumentation II: the multimode to single mode transition

Imaging the heart of astrophysical objects with optical long-baseline interferometry

Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy

Vision: A Six-Telescope Fiber-Fed Visible Light Beam Combiner for the Navy Precision Optical Interferometer

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

Optical intensity interferometry lab tests in preparation of stellar diameter measurements at IACTs at GHz photon rates