Abstract:Long baseline optical interferometry and aperture synthesis using ground-based telescopes can enable unprecedented angular resolution astronomy in the optical domain. However, atmospheric turbulence leads to large, dynamic phase errors between participating apertures that limit fringe visibility using telescopes arrays or subaperture configurations in a single large telescope. Diffraction limited optics or adaptive optics can be used to ensure coherence at each aperture, but correlating the phase between apertures requires high speed, high stroke phase correction and recombination that is extremely challenging and costly. As a solution, we show an alternative phase correction and beam combination method using a centimeter-scale silicon astrophotonic chip optimized for H-band operation. The 4.7x10mm silicon photonic chip is fabricated using electron beam lithography with devices with 2 up to 32 independent channels. Light is coupled into the chip using single mode fiber ribbons. An array of microheaters is used to individually tune the effective index of each spiral delay waveguides. Narrowband spectral splitters at each spatial channel divert a modulated digital reference signal from an artificial guide star off-chip for phase measurement. Science light from other wavelengths is coherently combined using on-chip beam combiners and outputted to a single waveguide. We described the role, design, fabrication and characterization of the photonic chip. This photonic phase control scheme can be applied in astronomical interferometry or optical satellite communications.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: **How to overcome the phase error caused by atmospheric turbulence in long - baseline optical interferometry to achieve high - resolution astronomical observations**. ### Specific Problems and Solutions 1. **Large - dynamic - range phase error caused by atmospheric turbulence**: - **Problem**: Atmospheric turbulence can cause very large and rapidly changing phase differences between the beams received by different telescopes, which will seriously affect the visibility of interference fringes. - **Solution**: The paper proposes an integrated photonic phase control and beam combination (PSBC) scheme based on silicon photonic chips. By using micro - heaters to precisely control the temperature of the spiral - delay waveguides, the phase difference can be quickly corrected, thus maintaining the visibility of the interference fringes. 2. **Requirement for high - speed and large - range phase correction**: - **Problem**: Although traditional methods such as fiber stretchers can correct the phase, they are relatively slow and difficult to cope with the rapidly changing atmospheric phase errors. - **Solution**: This scheme takes advantage of integrated photonics to achieve a phase correction speed of over 10 kHz, which can track and correct atmospheric phase changes in real time. 3. **Multi - channel coherent beam combination**: - **Problem**: In the sub - aperture configurations of multiple telescopes or a single large telescope, it is necessary to coherently combine the beams from multiple receivers to generate interference fringes for astronomical interferometry. - **Solution**: By designing star - couplers and hierarchical 2x1 combiners, multi - channel beam coherent combination can be efficiently achieved on the chip. 4. **Separation and processing of laser guide star signals**: - **Problem**: In order to perform phase measurement, it is necessary to separate the modulation signal (DSM) of the laser guide star from the scientific light while ensuring that the flux of the scientific light is not affected. - **Solution**: Use a ring - resonator filter to separate the DSM signal, and use VHF frequency modulation to ensure that the dynamic range of phase measurement reaches meter - level accuracy. ### Technical Details - **Silicon photonic chip design**: The chip size is 4.7x10 mm, which is fabricated by electron - beam lithography technology and contains 2 to 32 independent channels. - **Micro - heater array**: By adjusting the effective refractive index of each spiral - delay waveguide, precise control of the phase is achieved. - **Narrow - band spectral splitter**: Used to separate the modulated digital reference signal from the artificial guide star for phase measurement. - **On - chip beam combiner**: Coherently combines the scientific light of other wavelengths and outputs it into a single waveguide. ### Application Prospects This scheme can be applied not only to astronomical interferometry but also extended to fields such as optical satellite communication, and has broad application potential. In summary, this paper provides an efficient and fast phase correction and beam combination method through integrated photonics technology, solving the key problems caused by atmospheric turbulence in long - baseline optical interferometry.

Integrated astrophotonic phase control for high resolution optical interferometry

Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters

Photonic chip for visible interferometry: laboratory characterization and comparison with the theoretical model

Integrated optics for astronomical interferometry. I. Concept and astronomical applications

Broadband Waveguide Chip Design with Phase Measurement Function for Enhancing Optical Interferometric Imaging

End-to-end simulations of photonic phase correctors for adaptive optics systems

A Flexible on-chip phase calibration method for optical phased array

Novel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings

High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers

On-chip Wavefront Shaping in Spacing-Varied Waveguide Arrays

Photonic beam-combiner for visible interferometry with SCExAO/FIRST: laboratory characterization and design optimization

Performance estimation of photonic integrated wavefront corrector for single-mode fiber coupling

A Phase Difference Measurement Method for Integrated Optical Interferometric Imagers

An infrared integrated optic astronomical beam combiner for stellar interferometry at 3-4 microns

Astrophotonic Technologies

Integrating planar photonics for multi-beam generation and atomic clock packaging on chip

On-chip spectro-detection for fully integrated coherent beam combiners

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

A microphotonic astrocomb

Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy

An on-chip astrophotonic spectrograph with a resolving power of 12,000