Abstract:Production of fibers from nonthermoplastic polymers, such as chitosan, usually requires dissolution with subsequent fiber formation, for instance, via coagulation. Good fiber-forming properties enable simultaneous spinning of multiple fibers into a yarn, which is one of the prerequisites for process scalability. Here, we report a multifilament wet-spinning process that eliminates the use of such volatile organic compounds as methanol and acetone, enhances fiber formation, and allows producing continuous well-separated chitosan fibers after drying. This is achieved by (i) solidification of the extruded solution by alkali and sodium acetate in the coagulation bath and (ii) further stabilization of the fibers by adsorbing the anionic surfactant, sodium dodecyl sulfate. The obtained fibers have a circular cross section and smooth surface. We demonstrate that it is possible to increase fiber breaking tenacity and Young's modulus by applying stretching (draw ratios up to 1.77) or by incorporating cellulose nanofibrils (CNFs, up to 4 wt % based on chitosan) in the spinning solutions. However, the limitation of increased viscosity when adding CNF is needed to be overcome for possible higher reinforcement effects. We demonstrate that fiber breaking tenacity, Young's modulus, and elongation at break can be enhanced even further by increasing the spin dope temperature from 22 to 60 °C, with simultaneously increasing the spin dope solid content to keep the same dope viscosity. The fibers with a maximum breaking tenacity of ca. 10 cN/tex at an elongation at break of ca. 7.5% were obtained.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.0c00562?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.0c00562</a>.Chemical structures of CNF and CNC, microscopy images of chitosan solutions and fibers, rheological data, SEM images, and EDS spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.0c00562/suppl_file/ap0c00562_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Flexible fibers wet-spun from formic acid modified chitosan

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

A New Approach for Preparing Chitosan Fibers from a LiOH/urea Solvent System

A soft multifunctional film from chitosan modified with disulfide bond cross-links and prepared by a simple method

Chitin Fiber and Chitosan 3D Composite Rods

Chitosan Rod Reinforced with Absorbent Cotton Fibers

Preparation of chitin twisted fiber and its functional applications

A New Method To Prepare Chitosan Membrane As A Biomedical Material

Spinning Process of Chitosan Fiber with Low Concentration of Formic Acid Solution and its Characteristics

Wet Spinning of Chitosan Fibers: Effect of Sodium Dodecyl Sulfate Adsorption and Enhanced Dope Temperature

Chitosan rod reinforced by self-crosslinking through thermal treatment

Mechanically strong all-chitin filaments: Wet-spinning of β-chitin nanofibers in aqueous NaOH

Wet spinning of fibers made of chitosan and chitin nanofibrils

Super‐Strong and Super‐Stiff Chitosan Filaments with Highly Ordered Hierarchical Structure

High-strength and recyclable pure chitosan films manufactured by an ionic liquid assisted roll-forming method

Continuous Pilot‐Scale Wet‐Spinning of Biocompatible Chitin/Chitosan Multifilaments from an Aqueous KOH/Urea Solution

Wet spinning of chitosan and the acetylation of chitosan fibers

Antimicrobial fibers based on chitosan and polyvinyl-alcohol

Enhancing Chitosan Fibers: A Dual Approach with Tripolyphosphate and Ursolic Acid

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath