Abstract:Production of fibers from nonthermoplastic polymers, such as chitosan, usually requires dissolution with subsequent fiber formation, for instance, via coagulation. Good fiber-forming properties enable simultaneous spinning of multiple fibers into a yarn, which is one of the prerequisites for process scalability. Here, we report a multifilament wet-spinning process that eliminates the use of such volatile organic compounds as methanol and acetone, enhances fiber formation, and allows producing continuous well-separated chitosan fibers after drying. This is achieved by (i) solidification of the extruded solution by alkali and sodium acetate in the coagulation bath and (ii) further stabilization of the fibers by adsorbing the anionic surfactant, sodium dodecyl sulfate. The obtained fibers have a circular cross section and smooth surface. We demonstrate that it is possible to increase fiber breaking tenacity and Young's modulus by applying stretching (draw ratios up to 1.77) or by incorporating cellulose nanofibrils (CNFs, up to 4 wt % based on chitosan) in the spinning solutions. However, the limitation of increased viscosity when adding CNF is needed to be overcome for possible higher reinforcement effects. We demonstrate that fiber breaking tenacity, Young's modulus, and elongation at break can be enhanced even further by increasing the spin dope temperature from 22 to 60 °C, with simultaneously increasing the spin dope solid content to keep the same dope viscosity. The fibers with a maximum breaking tenacity of ca. 10 cN/tex at an elongation at break of ca. 7.5% were obtained.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.0c00562?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.0c00562</a>.Chemical structures of CNF and CNC, microscopy images of chitosan solutions and fibers, rheological data, SEM images, and EDS spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.0c00562/suppl_file/ap0c00562_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Super‐Strong and Super‐Stiff Chitosan Filaments with Highly Ordered Hierarchical Structure

Continuous Pilot‐Scale Wet‐Spinning of Biocompatible Chitin/Chitosan Multifilaments from an Aqueous KOH/Urea Solution

Mechanically strong all-chitin filaments: Wet-spinning of β-chitin nanofibers in aqueous NaOH

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath

Extremely strong and tough chitosan films mediated by unique hydrated chitosan crystal structures

An Ultra‐Strong, Water Stable and Antimicrobial Chitosan Film with Interdigitated Bouligand Structure

Preparation of chitin twisted fiber and its functional applications

Preparation and Characterization of Cellulose Fiber/chitosan Composites

Superior Strong and Stiff Alginate Fibers by Entanglement-Enhanced Stretching

Green Fabrication of High-Performance Chitin Nanowhiskers/PVA Composite Films with a “Brick-and-Mortar” Structure

Organized assembly of chitosan into mechanically strong bio-composite by introducing a recombinant insect structural protein OfCPH-1

Organized assembly of chitosan into mechanically strong bio-composite by introducing a recombinant insect structural protein Of CPH-1

High mechanical performance based on the alignment of cellulose nanocrystal/chitosan composite filaments through continuous coaxial wet spinning

Chitin Fiber and Chitosan 3D Composite Rods

Strong, Water-Resistant, and Ionic Conductive All-Chitosan Film with a Self-Locking Structure

High-strength and recyclable pure chitosan films manufactured by an ionic liquid assisted roll-forming method

Continuously spun biocomposite fibers from feather keratin and chitin with better toughness than wool via enhanced protein unfolding and conformation organization

Wet Spinning of Chitosan Fibers: Effect of Sodium Dodecyl Sulfate Adsorption and Enhanced Dope Temperature

Fabrication and characterization of biodegradable KH560 crosslinked chitin hydrogels with high toughness and good biocompatibility

Reinforcement effects of different types of chitin nanofibers on cellulose/chitin nanocomposite filaments