Abstract:The commonly used chitin whiskers (CHWs) prepared by the acid hydrolysis method are easy to agglomerate in an alkaline matrix, which limits their applications in many aspects. Herein, maleation chitin whiskers (mCHWs) with lots of −COOH groups were designed, which can stably exist and homogeneously disperse in the alkaline chitin matrix due to their relatively strong electronegativities. Subsequently, the CHWs and mCHWs were utilized as reinforcing fillers to enhance the mechanical strength of the chitin hydrogel. As expected, the CHWs played an extremely limited role in reinforcing the chitin hydrogel. Conversely, due to good dispersibility and strong interfacial interaction, the mCHWs exhibited a significantly superior enhancement effect on the chitin hydrogel. Moreover, the tensile strength and modulus of the as-prepared mCHW/chitin composite hydrogels were strongly dependent on the content of mCHWs, and the highest values of 5.8 ± 0.2 and 5.2 ± 0.6 MPa were obtained with 3 wt % mCHW content, which are higher than those of polysaccharide hydrogels reported in the most literature. Importantly, both CHWs and mCHWs can facilitate the adhesion, proliferation, and differentiation of mouse embryo osteoblast precursor (MC3T3-E1) cells. Moreover, the mCHWs also play these promoting effects in a content-dependent manner. Interestingly, CHWs and mCHWs mainly contain −NH<sub>2</sub> and −COOH groups, respectively; as a result, surface protein adsorption and calcium-phosphate mineralization are different. But there are very small differences in cell adhesion, proliferation, and differentiation between the corresponding 3%CHW/chitin and 3%mCHW/chitin composite hydrogels. This work provides a promising strategy to construct a polysaccharide nanocomposite hydrogel with robust mechanical strength and osteogenesis for potential application as an artificial periosteum.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06411?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06411</a>.The FTIR spectra of the purified chitin and chitin hydrogel (Figure S1); the tensile properties of chitin hydrogels prepared using different parameters (Figure S2); the length and diameter distribution of CHWs and mCHWs (Figure S3); the shrinkage degree of hydrogels after regeneration (Figure S4); and the tensile properties of CHW/chitin composite hydrogels with different contents of CHWs (Figure S5) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06411/suppl_file/sc0c06411_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mechanically strong all-chitin filaments: Wet-spinning of β-chitin nanofibers in aqueous NaOH

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Super‐Strong and Super‐Stiff Chitosan Filaments with Highly Ordered Hierarchical Structure

Continuous Pilot‐Scale Wet‐Spinning of Biocompatible Chitin/Chitosan Multifilaments from an Aqueous KOH/Urea Solution

Evaluating the strategies to improve strength and water-resistance of chitin nanofibril assembled structures: Molecule-bridging, heat-treatment and deacidifying

Preparation of chitin twisted fiber and its functional applications

Pseudosolvent Intercalator of Chitin: Self‐Exfoliating into Sub‐1 nm Thick Nanofibrils for Multifunctional Chitinous Materials

Reinforcement effects of different types of chitin nanofibers on cellulose/chitin nanocomposite filaments

Chiral nematic self-assembly of minimally surface damaged chitin nanofibrils and its load bearing functions

Structural changes in α-chitin through nanofibrillation by high-pressure homogenization in water

Creating Ultrastrong and Osteogenic Chitin Nanocomposite Hydrogels via Chitin Whiskers with Different Surface Chemistries

Wet spinning of chitin nanowhiskers: Effects of electrolyte composition in coagulation baths on mechanical properties and nanowhisker orientation

Supramolecular Cross-Linking Affords Chitin Nanofibril Nanocomposites with High Strength and Water Resistance

Nanostructured membranes based on native chitin nanofibers prepared by mild process

Extremely strong and tough chitosan films mediated by unique hydrated chitosan crystal structures

Biomimetic chitin hydrogel via chemical transformation

Single Molecular Layer of Chitin Sub‐Nanometric Nanoribbons: One‐Pot Self‐Exfoliation and Crystalline Assembly into Robust, Sustainable, and Moldable Structural Materials

Effect of Surface Functionality on the Rheological and Self-Assembly Properties of Chitin and Chitosan Nanocrystals and Use in Biopolymer Films

Green Fabrication of High-Performance Chitin Nanowhiskers/PVA Composite Films with a “Brick-and-Mortar” Structure

High-tensile chitin films regenerated from cryogenic aqueous phosphoric acid