Abstract:Inspired by the ordered beta-sheet crystalline structure and molecular orientation of natural silkworm silk, biomimetic silk fibers with refined crystalline structure were creatively produced through incorporating cellulose nanocrystals (CNCs) into silk fibroin (SF) matrix to mimic the beta-sheet crystallites in natural silk via wet-spinning assembly technology. The influence of CNCs and post-draw on the structural characteristics, and thermal and mechanical properties of regenerated cellulose nanocrystal/silk fibroin (CNC/SF) fibers were comparatively studied with those of degummed silk. The resultant CNC/SF fibers exhibited a uniform, circular shape as well as dense morphology. The CNCs were uniformly dispersed into SF matrix and aligned along the fiber axis, which were beneficial to the formation of more ordered structure through intermolecular hydrogen bonding interactions. The crystallinity and overall molecular orientation of CNC/SF fibers were increased with increases of draw ratio and CNC contents, although lower than those of degummed silk. DSC and TGA analysis revealed that thermal decomposition behavior of CNC/SF fibers presented different features depending on the CNC contents, whereas maximum decomposition temperature of CNC/SF fibers improved sharply at first and then decreased slightly with the increase of CNC contents. Moreover, the tan delta peak temperatures of SF were increased with the addition of CNC, indicating restrained SF molecular mobility in the vicinity of the CNC surface. These results indicated that the CNC could substantially enhance the mechanical properties of SF and this enhancement could be attributed to the strong hydrogen bonding interactions as well as CNC-induced crystallization and orientation. Meanwhile, Young's modulus, tensile strength and breaking strain of the CNC/SF fibers with 5 wt% CNC were significantly increased to 28.8 +/- 2.6 GPa, 728.5 +/- 36.4 MPa and 23.1 +/- 1.6% respectively, higher than those of degummed silk. Thus it was demonstrated that biomimicking the natural silk crystalline structure using CNC as beta-sheet crystallite is a promising strategy for production of artificial silk fiber with improved strength without compromising the toughness.

High mechanical performance based on the alignment of cellulose nanocrystal/chitosan composite filaments through continuous coaxial wet spinning

Adhesive Properties of Bio-Based Epoxy Resin Reinforced by Cellulose Nanocrystal Additives

Advance Study of Cellulose Nanocrystals Properties and Applications

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath

High-strength and functional nanocellulose filaments made by direct wet spinning from low concentration suspensions

Enhanced mechanical and thermal properties while maintaining transparency of epoxy resin film by introducing shear-oriented cellulose nanocrystals

Influence of concentration, dispersibility, compatibility and orientation of rod-like cellulose nanocrystals in epoxy resin on the mechanical performance of their composite films

Methyl cellulose/cellulose nanocrystal nanocomposite fibers with high ductility

Biological–chemical modification of cellulose nanocrystal to prepare highly compatible chitosan-based nanocomposites

Construction of Nanocrystalline Cellulose-Based Composite Fiber Films with Excellent Porosity Performances via an Electrospinning Strategy

Biomimicking the structure of silk fibers via cellulose nanocrystal as β-sheet crystallite

Highly Tough, Stretchable, and Solvent‐Resistant Cellulose Nanocrystal Photonic Films for Mechanochromism and Actuator Properties

Highly Strong and Conductive Carbon Fibers Originated from Bioinspired Lignin/Nanocellulose Precursors Obtained by Flow-Assisted Alignment and In Situ Interfacial Complexation

Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers

Reinforcement effects of different types of chitin nanofibers on cellulose/chitin nanocomposite filaments

Bioinspired hierarchical helical nanocomposite macrofibers based on bacterial cellulose nanofibers

Toward continuous high-performance bacterial cellulose macrofibers by implementing grading-stretching in spinning

Super‐Strong and Super‐Stiff Chitosan Filaments with Highly Ordered Hierarchical Structure

Preparation of nanocellulose by a biological method from hemp stalk in contrast to the chemical method and its application on the electrospun composite film

Preparation and characterization of electrospun cellulose nanocrystals-reinforced trans-1,4-polyisoprene nanocomposite elastomeric fiber membranes

Rheological behavior and particle alignment of cellulose nanocrystal and its composite hydrogels during 3D printing