Abstract:Here we propose and experimentally demonstrate an optical fiber torsion sensor with twist direction discrimination capability by incorporating a long-period fiber grating (LPFG) inscribed on polarization-maintaining photonic crystal fiber (PMPCF) by CO2 laser pulses. An LPFG formed on PMPCF has an input-polarization-dependent resonance dip, and two separated resonance dips, designated as the shorter wavelength-dip (SWD) and longer wavelength-dip (LWD), are obtained with respect to orthogonal input polarization. The torsion response of the sensor head was investigated in a wide twist angle range of –220° to 220° for the two resonance dips. Highly linear torsion responses of the SWD and LWD could be obtained with adjusted R2 values of ∼0.9960 and ∼0.9967, respectively, in a twist angle range from –160° to 160°, when their transmittance levels measured in a logarithmic scale were converted into a linear scale. The torsion sensitivities of the SWD and LWD were measured as –5.067 and 4.830%/rad in this twist angle range of high linearity, respectively. In particular, its temperature response was also examined in a temperature range from 35 to 85° C. With pre-torsion applied to the sensor head at twist angles of 220° and –220°, the temperature sensitivities of the SWD and LWD were measured as ∼3.64 and ∼9.75 pm/°C in terms of the dip wavelength and –2.87x10-3 and 5.45x10-5 dB/°C in terms of the dip transmittance, respectively. The experimental results corroborate that our sensor can perform virtually temperature-insensitive torsion measurement with twist direction discrimination capability and good linearity in a wide measurement range.

Analysis of Force Sensor Using Polymer Optical Fiber Based on Twisting Structure

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

FFT Algorithm-Assisted Polarimetric Twist Sensor

High pressure sensor based on intensity-variation using polymer optical fiber

High-Sensitivity Microfiber Strain and Force Sensors

Highly sensitive force sensor based on optical microfiber asymmetrical Fabry-Perot interferometer.

The plastic optical fiber cantilever beam as a force sensor

Orbital angular momentum mode fiber force sensing technology based on intensity Interrogation

Dynamic Rotational Sensor Using Polymer Optical Fiber for Robot Movement Assessment Based on Intensity Variation

A Simple Strain Sensor Using Polymer Fiber Bragg Grating and Long-Period Fiber Grating

A force measurement method using the optical fibre beam

Strain Force Sensor with Ultra-High Sensitivity Based on Fiber Inline Fabry-Perot Micro-Cavity Plugged by Cantilever Taper

Investigation of Scattered-Bend Loss Coupling in Polymer Optical Fiber (POF) - Based Displacement Measurement Sensor

An optical fiber weighing sensor based on bending

Contactless Low-Cost Position Sensor Using a D-Shaped Polymer Optical Fiber

Optical Fiber Sensor with a Lateral-Offset Structure Assisted by Virtual Vernier Effect for Stretching Strain Measurement

Twist-Direction-Discriminable Torsion Sensor Using Long-Period Fiber Grating Inscribed on Polarization-Maintaining Photonic Crystal Fiber

A fiber-based torsion sensor with tunable sensitivity

A New Type of Structure of Optical Fiber Pressure Sensor Based on Polarization Modulation

A Compliant 3-Axis Fiber-Optic Force Sensor for Biomechanical Measurement