Abstract:Abstract The role of metal matrix composites (MMCs) has gained huge momentum in various researches as well as in industrial applications due to their high stiffness and higher strength to weight ratio. It helps in achieving enormous weight reduction without compromising the strength of the material. In this study, a novel attempt was made to fabricate MMCs with martensitic stainless steel as matrix and titanium diboride (TiB 2 ) as reinforcement. The AISI 420 matrix with different weight percentages (1%, 2%, and 4%) of TiB 2 reinforcement was fabricated by vacuum induction melting technique (VIM). The aim of this study was to analyze the influence of TiB 2 particle addition on the mechanical and tribological properties of AISI 420 composites. X-ray diffraction studies revealed the presence of TiB 2 phase in the composite along with peak shifting and broadening of the steel matrix due to induced strain. Optical microscopy showed the distribution of TiB 2 particles in the matrix along with a significant amount of grain refinement of the composite due to the addition of TiB 2 . Microhardness results showed that the presence of TiB 2 improved the hardness with AISI 420/4%TiB 2 composite possessing the maximum hardness. Tensile test results indicated a significant improvement in the ultimate tensile and yield strength of the composite with the addition of TiB 2 . The wear tests were carried out on a pin on disc tribometer for various loads at a different sliding distance for steady sliding velocity. The dispersion of TiB 2 particle helped in achieving better wear resistance of the composites. Wear surface morphology was carried out to explore the wear mechanisms. Among the various wear mechanisms, abrasion and oxidation phenomena dominated in the composites. Taguchi optimization technique predicted that wt% of TiB 2 and applied load as influencing factors on the wear rate of the material.

Evaluation of the tribological properties of metal matrix composite materials (MMCs) obtained by additive manufacturing using selective laser melting (SLM)

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review

Wear Behavior of Selective Laser Melted 06Cr15Ni4CuMo Steel

Experimental Investigation into the Dry Reciprocating Wear Behavior of Additively Manufactured Austenitic Stainless Steel (316L) Alloys

Tribological behavior investigation of 316L stainless steel samples processed by selective laser melting

Selective Laser Melting and Mechanical Properties of Stainless Steels

Additively Manufactured Sic-Reinforced Stainless Steel With Excellent Strength And Wear Resistance

Selective laser melting 316L/CuSn10 multi-materials: Processing optimization, interfacial characterization and mechanical property

Tribological Behavior of TiC Particles Reinforced 316Lss Composite Fabricated Using Selective Laser Melting

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

Additive Manufacturing of Ultrafine-Grained Austenitic Stainless Steel Matrix Composite Via Vanadium Carbide Reinforcement Addition and Selective Laser Melting: Formation Mechanism and Strengthening Effect

Microstructure and Mechanical Behavior of TiCN Reinforced AlSi10Mg Composite Fabricated by Selective Laser Melting

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Characterization and Defect Analysis of Machined Regions in Al-SiC Metal Matrix Composites Using an Abrasive Water Jet Machining Process

Study of the microstructure and wear properties of Ti-12Mo-6Zr-2Fe alloy fabricated via selective laser melting

Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology

Investigation on mechanical and tribological behaviour of titanium diboride reinforced martensitic stainless steel

Effects of Micron/Submicron TiC on Additively Manufactured AlSi10Mg: A Comprehensive Study from Computer Simulation to Mechanical and Microstructural Analysis

Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements

Microstructural, Mechanical and Tribological Behaviour of NiTi/SiC/ZrO2 Reinforced Aluminium 6061 Hybrid MMCs