Abstract:The primary objective of this study is to fabricate an Al-12wt. % Si Alloy/ZrO2 composite using the Stir Casting technique, with a specific focus on assessing its performance, particularly in terms of wear characteristics. This research presents a unique approach by utilizing Al-12wt. % Si Alloy as the matrix material, aiming to develop tailored Al Alloy matrix composites suitable for applications requiring enhanced tribological properties. The composites are systematically manufactured with varying percentages of micro-sized ZrO2 reinforcements, specifically 0.5, 1, and 3wt. %. The incorporation of ZrO2 results in significant improvements in wear resistance, a critical attribute for Al-12wt. % Si Alloy-based composites. These composites find extensive utility across industries such as marine, aerospace, automotive, and the power sector, where they are indispensable for producing vital components like electrical sliding contacts, gears, bearings, bushes, pistons, piston rings, and clutches. Despite the availability of various promising reinforcement materials, researchers persistently explore novel combinations of matrices and reinforcements to tailor properties and enhance cost-effectiveness. ZrO2 has emerged as a notable reinforcement material in metal matrix composites, as evidenced by numerous research endeavours. The composites fabricated with ceramic reinforcement's exhibit enhanced tribological characteristics. The study observes that the wear rate decreases up to 3 wt. % of reinforcements, beyond which it increases due to reinforcement agglomeration. The optimal wear-resistant combination is found at 3 wt. % of ZrO2, attributed to robust micro-coring and interstitial metal-oxygen bonding facilitated by the Si content in the Al-12%Si matrix. The results are further optimized using Response Surface Methodology (RSM) techniques and validated using the ANOVA table to elucidate the behaviour of the composites under different operational conditions. The hardness results further ascertain the decrease in the wear rate due to the inclusion of ZrO2 reinforcements owing to micro coring and strengthening.

Microstructural, Mechanical and Tribological Behaviour of NiTi/SiC/ZrO2 Reinforced Aluminium 6061 Hybrid MMCs

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Microstructure and properties of aluminium matrix hybrid nanocomposite

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Silicon Nitride as a Reinforcement for Aluminium Metal Matrix Composites to Enhance Microstructural, Mechanical and Tribological Behavior

Experimental Investigation of Friction and Wear Behavior of AL7075-TiO2-B4C using RSM, ANN and Desirability Function

Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications

CHARACTERIZATION OF WEAR RATE OF Al-12WT. %Si ALLOY BASED MMC REINFORCED WITH ZrO2 PARTICULATES

Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological performances

Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite

Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Experimental Investigation and Comparative Analysis of Aluminium Hybrid Metal Matrix Composites Reinforced with Silicon Nitride, Eggshell and Magnesium

Experimental tribological and mechanical behavior of aluminium alloy 6061 composites incorporated ceramic particulates using Taguchi analysis