Abstract:Additive manufacturing, especially laser powder bed fusion (L-PBF), is widely used for fabricating metal parts with intricate geometries. However, parts produced via L-PBF suffer from varied surface roughness which affects the dynamic or fatigue properties. Accurate prediction of fatigue properties as a function of surface roughness is a critical requirement for qualifying L-PBF parts. In this work, an analytical methodology is put forth to predict the fatigue life of L-PBF components having heterogeneous surface roughness. Thirty-six Hastelloy X specimens are printed using L-PBF followed by industry-standard heat treatment procedures. Half of these specimens are built with as-printed gauge sections and the other half is printed as cylinders from which fatigue specimens are extracted via machining. Specimens are printed in a vertical orientation and an orientation 30 degree from the vertical axis. The surface roughness of the specimens is measured using computed tomography and parameters such as the maximum valley depth are used to build an extreme value distribution. Fatigue testing is conducted at an isothermal condition of 500-degree F. It is observed that the rough specimens fail much earlier compared to the machined specimens due to the deep valleys present on the surfaces of the former ones. The valleys act as notches leading to high strain localization. Following this observation, a functional relationship is formulated analytically that considers surface valleys as notches and correlates the strain localization around those notches with fatigue life, using the Coffin-Manson-Basquin and Ramberg-Osgood equation. In conclusion, the proposed analytical model successfully predicts the fatigue life of L-PBF specimens at an elevated temperature undergoing different strain loadings.

A fatigue life model accounting for the combined effect of surface roughness and microstructure: Application to SLM fabricated Hastelloy-X

Microstructure sensitive fatigue life prediction model for SLM fabricated Hastelloy-X

Surface roughness-informed fatigue life prediction of L-PBF Hastelloy X at elevated temperature

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

High-temperature high-cycle fatigue performance and machine learning-based fatigue life prediction of additively manufactured Hastelloy X

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Quantifying uncertainty in fatigue crack growth of SLM 316L through advanced predictive modeling

Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior

A Modified Normal Strain Ratio Fatigue Life Model Based on the Hybrid Approach of Critical Plane and Crystallographic Slip Theory

A novel model considering combined effects of as-built roughness and notch for multiaxial fatigue life prediction of L-PBF Ti6Al4V

Fatigue Characterization and Modeling of Additively Manufactured Hastelloy-X Superalloy

Fatigue life prediction of additively manufactured AlSi10Mg based on surface roughness and residual stress

Defect-related strain-controlled high-temperature fatigue behavior in additive manufacturing Hastelloy X assisted with ultrasonic micro-forging treatment

Numerical simulation of surface roughness effects on low-cycle fatigue properties of additively manufactured titanium alloys

An Experimentally Informed Computational Framework for Investigating the Role of Surface Roughness on High Cycle Fatigue Life of LPBF IN718

Fatigue Life Prediction of Film-cooling Hole Specimens with Initial Damage

The effect of surface roughness and microstructure on fretting fatigue properties of TC21 based on hierarchical multiscale modeling

Fatigue life prediction for LPBF-fabricated Ti-6Al-4V up to very-high-cycle regime based on continuum damage mechanics incorporating effect of defects

Fatigue life analysis for 6061-T6 aluminum alloy based on surface roughness

A modified SWT model for very high cycle fatigue life prediction of L-PBF Ti-6Al-4 V alloy based on Single Defect: Effect of building orientation

The potency of defects on fatigue of additively manufactured metals