Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Research on Manufacturing and Construction Technology of 50m Steel Box Girder

Key Techniques for Erection of Steel Truss Girders of Dashengguan Changjiang River Bridge in Nanjing

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Steel Box Girder Installation and Construction Practice of Fuzhou Airport Expressway Mawei Interchange

Replacement Construction of Gusset Plates at Adjustable Stringers for Rail-cum-Road Steel Truss Girder Bridge

of 30m Precast T-Beam Assembly Line in Smart Girder Fabrication Yard

Analysis of the forces in the construction of large-span steel box girder by incremental construction

Research on the Manufacturing Technology of the Main Steel Frame of Sanming Shaxian Airport Terminal

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Research on Standardized Structure and Construction Technology of Steel Truss Bridge with 40m Span

Research on intelligent integrated installation process and equipment of prefabricated bridges

Research on the construction control technology of large span cable-stayed bridge tower and girder

Construction technology innovation of Sunk Shaft foundation and composite tower of 1200m highway and railway cable-stayed bridge

Research Of Mechanical Behaviors And Key Techniques Of Steel-Concrete Box Beam In Beijing South Station Viaduct

Construction Simulation of Middle Column of Prefabricated Box Girder Bridge in Prefabrication Stage

Key Construction Technology of HuSuTong Yangtze River Bridge

Research on 3D Measurement and Rapid Location Technique for Assembling the Special-Shaped Structural Segments

Installation Design for Zhijinghe Steel Tube Arch Rib Bridge

Conceptual design and preliminary test of the novel structure of steel inner core-UHPC composite box girder

Research on Key Technologies for Construction of Steel Canopy Steel Structure in Chengdu Open Air Music Square