Abstract:Only low‐mass‐ratio alloying element A (A represents alloying element, Ag or Mg in this work) is needed and the high active Li capacity is ensured. Li‐ion extracts form the Li‐A solid solution anode make alloying element A gradually get enriched on the electrode surface. Such an alloying element A rich electrode surface would reduce the Li nucleation barrier and help to achieve planar Li deposition during the Li plating process. The pursuit of high energy density Li‐based rechargeable batteries has intrigued numerous research interest on Li metal anode. However, several significant challenges, including severe parasitic reactions and growth of Li dendrites, lead to fast electrode failure and impede its practical implantation. Herein, it is revealed that the dynamic concentration of alloying element in Li solid solution can significantly improve the cycling stability. It is demonstrated that the alloying element of Li solid solution continuously evolved in the reaction layer on cycling. Alloying element got enriched on anode surface after Li stripping, and re‐dispersed into the deposited Li during Li plating processes. The alloying element‐rich surface can reduce the Li nucleation barrier and promote the uniform Li plating behavior. Ultrathin Li solid solution foils are fabricated, and the dynamic alloying element concentration mechanism is further verified, and the cycling lifespan of pure Li is doubled. Consequently, a 1.4 Ah laminated pouch cell with ultrathin Li solid solution anode (30 μm) exhibits high energy density of 836 Wh L−1 and stable cycling performance under the harsh conditions with low negative/positive capacity (N/P) ratio of 2 and electrolyte/capacity (E/C) ratio of 2.6 g Ah−1.

Tuning wettability of gallium-based liquid metal anode for lithium-ion battery via a metal mixing strategy

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes

Transferring Liquid Metal to Form a Hybrid Solid Electrolyte Via a Wettability-Tuning Technology for Lithium-Metal Anodes

Endowing Cu Foil Self-Wettable in Molten Lithium: A Roll-to-Roll Wet Coating Strategy to Fabricate High-Performance Ultrathin Lithium Metal Anodes

Compositional Engineering of Lithium Metal Anode for High‐Performance Garnet‐Type Solid‐State Lithium Battery

Melting lithium alloying to improve the affinity of Cu foil for ultra-thin lithium metal anode

Roll-to-roll fabrication of lithium metal anodes with hierarchical lithiophilic structures and controlled deposition for enhanced stability

Large-scale synthesis of high-quality lithium-graphite hybrid anodes for mass-controllable and cycling-stable lithium metal batteries

Fast and Simple Ag/Cu Ion Exchange on Cu Foil for Anode-Free Lithium-Metal Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

An Antipulverization and High‐Continuity Lithium Metal Anode for High‐Energy Lithium Batteries

A novel strategy for designing the lithium powder anode stabilized by electrospun membrane for lithium metal batteries with high specific energy

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Interfacial passivation by room-temperature liquid metal enabling stable 5 V-class lithium-metal batteries in commercial carbonate-based electrolyte

Dynamic Concentration of Alloying Element on Anode Surface Enabling Cycle‐Stable Li Metal Batteries

Tailoring the Mechanical and Electrochemical Properties of an Artificial Interphase for High‐Performance Metallic Lithium Anode

Optimized Lithium Deposition on Ag Nanoparticles-Embedded TiO2 Microspheres: A Facile Spray Pyrolysis Approach for Enhanced Lithium Metal Anode

Preparation and electrochemical performance study of a self-healing electrode composite material with WSe 2 /liquid metal Galinstan for lithium-ion batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Interfacial Strategies Towards Highly Stable Li-metal Anode of Liquid-based Li-metal Batteries